Files
tqma6-yocto-mirror/sources/meta-arm/meta-arm-bsp/recipes-bsp/trusted-firmware-a/files/n1sdp/0002-Modify-BL32-Location-to-DDR4.patch

31 lines
1.1 KiB
Diff
Raw Normal View History

From 15dab90c3cb8e7677c4f953c2269e8ee1afa01b0 Mon Oct 2 13:45:43 2023
From: Mariam Elshakfy <mariam.elshakfy@arm.com>
Date: Mon, 2 Oct 2023 13:45:43 +0000
Subject: [PATCH] Modify BL32 Location to DDR4
Since OP-TEE start address is changed to run
from DDR4, this patch changes BL32 entrypoint
to the correct one.
Upstream-Status: Pending (not yet submitted to upstream)
Signed-off-by: Mariam Elshakfy <mariam.elshakfy@arm.com>
---
plat/arm/board/n1sdp/fdts/n1sdp_optee_spmc_manifest.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/plat/arm/board/n1sdp/fdts/n1sdp_optee_spmc_manifest.dts b/plat/arm/board/n1sdp/fdts/n1sdp_optee_spmc_manifest.dts
index ed870803c..797dfe3a4 100644
--- a/plat/arm/board/n1sdp/fdts/n1sdp_optee_spmc_manifest.dts
+++ b/plat/arm/board/n1sdp/fdts/n1sdp_optee_spmc_manifest.dts
@@ -22,8 +22,8 @@
maj_ver = <0x1>;
min_ver = <0x0>;
exec_state = <0x0>;
- load_address = <0x0 0x08000000>;
- entrypoint = <0x0 0x08000000>;
+ load_address = <0x0 0xDE000000>;
+ entrypoint = <0x0 0xDE000000>;
binary_size = <0x2000000>;
};