75 lines
2.6 KiB
PHP
75 lines
2.6 KiB
PHP
|
MACHINEOVERRIDES =. "mx8mp:"
|
||
|
|
|
||
|
|
require conf/machine/include/imx-base.inc
|
||
|
|
require conf/machine/include/arm/armv8a/tune-cortexa53.inc
|
||
|
|
|
||
|
|
# Mainline BSP defaults to "generic" cortexa53 configuration,
|
||
|
|
# adjust it here to include crypto extension which enables
|
||
|
|
# inline NEON and FPU code generation
|
||
|
|
DEFAULTTUNE:use-mainline-bsp = "cortexa53-crypto"
|
||
|
|
|
||
|
|
MACHINE_FEATURES += "pci wifi bluetooth nxp8997-pcie nxp8997-sdio nxp9098-pcie nxp9098-sdio"
|
||
|
|
|
||
|
|
# NXP BSP can consume proprietary jailhouse and Marvell drivers
|
||
|
|
# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
|
||
|
|
# a full support for it yet.
|
||
|
|
MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
|
||
|
|
|
||
|
|
# Mainline kernel contains only one DTB file for
|
||
|
|
# imx8mpevk machine
|
||
|
|
KERNEL_DEVICETREE = " \
|
||
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
|
||
|
|
"
|
||
|
|
|
||
|
|
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
|
||
|
|
|
||
|
|
IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
|
||
|
|
IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
|
||
|
|
|
||
|
|
UBOOT_SUFFIX = "bin"
|
||
|
|
|
||
|
|
UBOOT_CONFIG ??= "sd"
|
||
|
|
UBOOT_CONFIG[sd] = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
|
||
|
|
UBOOT_CONFIG[ecc] = "${UBOOT_CONFIG_BASENAME}_inline_ecc_defconfig"
|
||
|
|
|
||
|
|
SPL_BINARY = "spl/u-boot-spl.bin"
|
||
|
|
|
||
|
|
ATF_PLATFORM = "imx8mp"
|
||
|
|
|
||
|
|
IMXBOOT_TARGETS = \
|
||
|
|
"${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', \
|
||
|
|
'${IMXBOOT_TARGETS_BASENAME}', d)}"
|
||
|
|
|
||
|
|
IMX_BOOT_SOC_TARGET = "iMX8MP"
|
||
|
|
|
||
|
|
SERIAL_CONSOLES = "115200;ttymxc1"
|
||
|
|
|
||
|
|
# Add support for Syslinux to mainline BSP.
|
||
|
|
# U-Boot has the Distro Boot mode enabled by default, which
|
||
|
|
# require that either Syslinux to be enabled, or a boot script
|
||
|
|
# to be used to define the boot process.
|
||
|
|
# We opt-in for Syslinux, since it is designated as a preferred
|
||
|
|
# distro boot mode according to the U-Boot documentation.
|
||
|
|
UBOOT_EXTLINUX:use-mainline-bsp = "1"
|
||
|
|
UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
|
||
|
|
UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
|
||
|
|
|
||
|
|
UBOOT_EXTLINUX_MENU_DESCRIPTION:default:use-mainline-bsp = "i.MX8M Plus EVK"
|
||
|
|
UBOOT_EXTLINUX_FDT:default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
|
||
|
|
UBOOT_EXTLINUX_CONSOLE:default:use-mainline-bsp = "console=${console}"
|
||
|
|
UBOOT_EXTLINUX_ROOT:default:use-mainline-bsp = "root=/dev/mmcblk1p2"
|
||
|
|
|
||
|
|
# Add extlinux.conf to the lis of files, which are deployed onto the
|
||
|
|
# boot partition
|
||
|
|
IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
|
||
|
|
|
||
|
|
LOADADDR = ""
|
||
|
|
UBOOT_MAKE_TARGET = "all"
|
||
|
|
IMX_BOOT_SEEK = "32"
|
||
|
|
|
||
|
|
OPTEE_BIN_EXT = "8mp"
|
||
|
|
TEE_LOAD_ADDR = "0x56000000"
|
||
|
|
|
||
|
|
# Add additional firmware
|
||
|
|
MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
|