Complete Yocto mirror with license table for TQMa6UL (2038-compliance)

- 264 license table entries with exact download URLs (224/264 resolved)
- Complete sources/ directory with all BitBake recipes
- Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl)
- Full traceability for Softwarefreigabeantrag
- GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4
- License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)

sources/meta-arm/meta-arm-bsp/conf/machine/corstone1000-fvp.conf

@@ -0,0 +1,75 @@
+#@TYPE: Machine
+#@NAME: corstone1000-fvp machine
+#@DESCRIPTION: Machine configuration for Corstone1000 64-bit FVP
+require conf/machine/include/corstone1000.inc
+
+TFA_TARGET_PLATFORM = "fvp"
+
+TFM_PLATFORM_IS_FVP = "TRUE"
+
+# testimage config
+TEST_TARGET = "OEFVPTarget"
+TEST_SUITES = "fvp_boot"
+
+# FVP Config
+FVP_PROVIDER ?= "fvp-corstone1000-native"
+FVP_EXE ?= "FVP_Corstone-1000"
+FVP_CONSOLES[default] = "host_terminal_0"
+FVP_CONSOLES[tf-a] = "host_terminal_1"
+FVP_CONSOLES[se] = "secenc_terminal"
+FVP_CONSOLES[extsys] = "extsys_terminal"
+
+#Disable Time Annotation
+FASTSIM_DISABLE_TA = "0"
+
+# FVP Parameters
+FVP_CONFIG[se.trustedBootROMloader.fname] ?= "bl1.bin"
+FVP_CONFIG[board.xnvm_size] ?= "64"
+FVP_CONFIG[se.trustedSRAM_config] ?= "6"
+FVP_CONFIG[se.BootROM_config] ?= "3"
+FVP_CONFIG[board.hostbridge.interfaceName] ?= "tap0"
+FVP_CONFIG[board.smsc_91c111.enabled] ?= "1"
+FVP_CONFIG[board.hostbridge.userNetworking] ?= "true"
+FVP_CONFIG[board.hostbridge.userNetPorts] ?= "5555=5555,8080=80,2222=22"
+FVP_CONFIG[board.se_flash_size] ?= "8192"
+FVP_CONFIG[diagnostics] ?= "4"
+FVP_CONFIG[disable_visualisation] ?= "true"
+FVP_CONFIG[se.nvm.update_raw_image] ?= "0"
+FVP_CONFIG[se.cryptocell.USER_OTP_FILTERING_DISABLE] ?= "1"
+
+# Boot image
+FVP_DATA ?= "board.flash0=corstone1000-flash-firmware-image-${MACHINE}.wic@0x68000000"
+
+# External system (cortex-M3)
+FVP_CONFIG[extsys_harness0.extsys_flashloader.fname] ?= "es_flashfw.bin"
+
+# FVP Terminals
+FVP_TERMINALS[host.host_terminal_0] ?= "Normal World Console"
+FVP_TERMINALS[host.host_terminal_1] ?= "Secure World Console"
+FVP_TERMINALS[se.secenc_terminal] ?= "Secure Enclave Console"
+FVP_TERMINALS[extsys0.extsys_terminal] ?= "Cortex M3"
+
+# MMC card configuration
+FVP_CONFIG[board.msd_mmc.card_type] ?= "SDHC"
+FVP_CONFIG[board.msd_mmc.p_fast_access] ?= "0"
+FVP_CONFIG[board.msd_mmc.diagnostics] ?= "0"
+FVP_CONFIG[board.msd_mmc.p_max_block_count] ?= "0xFFFF"
+FVP_CONFIG[board.msd_config.pl180_fifo_depth] ?= "16"
+FVP_CONFIG[board.msd_mmc.support_unpadded_images] ?= "true"
+FVP_CONFIG[board.msd_mmc.p_mmc_file] ?= "${IMAGE_NAME}.wic"
+
+# MMC2 card configuration
+FVP_CONFIG[board.msd_mmc_2.card_type] ?= "SDHC"
+FVP_CONFIG[board.msd_mmc_2.p_fast_access] ?= "0"
+FVP_CONFIG[board.msd_mmc_2.diagnostics] ?= "0"
+FVP_CONFIG[board.msd_mmc_2.p_max_block_count] ?= "0xFFFF"
+FVP_CONFIG[board.msd_config_2.pl180_fifo_depth] ?= "16"
+FVP_CONFIG[board.msd_mmc_2.support_unpadded_images] ?= "true"
+FVP_CONFIG[board.msd_mmc_2.p_mmc_file] ?= "corstone1000-esp-image-${MACHINE}.wic"
+
+# Virtio-Net configuration
+FVP_CONFIG[board.virtio_net.enabled] ?= "1"
+FVP_CONFIG[board.virtio_net.hostbridge.interfaceName] ?= "eth1"
+FVP_CONFIG[board.virtio_net.hostbridge.userNetworking] ?= "true"
+FVP_CONFIG[board.virtio_net.hostbridge.userNetPorts] ?= "5555=5555,8080=80,2222=22"
+FVP_CONFIG[board.virtio_net.transport] ?= "legacy"

sources/meta-arm/meta-arm-bsp/conf/machine/corstone1000-mps3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: corstone1000-mps3 machine
+#@DESCRIPTION: Machine configuration for Corstone1000 64-bit MPS3 FPGA board
+
+require conf/machine/include/corstone1000.inc
+
+TFA_TARGET_PLATFORM = "fpga"
+
+PLATFORM_IS_FVP = "FALSE"

sources/meta-arm/meta-arm-bsp/conf/machine/fvp-base.conf

@@ -0,0 +1,65 @@
+# Configuration for Armv8-A Base Platform FVP
+
+#@TYPE: Machine
+#@NAME: Armv8-A Base Platform FVP machine
+#@DESCRIPTION: Machine configuration for Armv8-A Base Platform FVP model
+
+require conf/machine/include/arm/arch-armv8-4a.inc
+
+ARM_SYSTEMREADY_FIRMWARE = "trusted-firmware-a:do_deploy"
+ARM_SYSTEMREADY_ACS_CONSOLE = "default"
+EXTRA_IMAGEDEPENDS = "${ARM_SYSTEMREADY_FIRMWARE}"
+
+MACHINE_FEATURES = "efi"
+
+IMAGE_NAME_SUFFIX = ""
+IMAGE_FSTYPES += "wic"
+WKS_FILE ?= "efi-disk.wks.in"
+
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+KERNEL_DEVICETREE = "arm/fvp-base-revc.dtb"
+KERNEL_IMAGETYPE = "Image"
+
+EXTRA_IMAGEDEPENDS += "trusted-firmware-a"
+
+# FVP u-boot configuration
+UBOOT_MACHINE = "vexpress_fvp_defconfig"
+
+EFI_PROVIDER ?= "grub-efi"
+
+# As this is a virtual target that will not be used in the real world there is
+# no need for real SSH keys.
+MACHINE_EXTRA_RRECOMMENDS += "ssh-pregen-hostkeys"
+
+TEST_TARGET = "OEFVPTarget"
+TEST_TARGET_IP = "127.0.0.1:2222"
+DEFAULT_TEST_SUITES:append = " fvp_boot fvp_devices"
+TEST_FVP_DEVICES ?= "rtc watchdog networking virtiorng cpu_hotplug"
+
+FVP_PROVIDER ?= "fvp-base-a-aem-native"
+FVP_EXE ?= "FVP_Base_RevC-2xAEMvA"
+FVP_CONFIG[bp.ve_sysregs.exit_on_shutdown] ?= "1"
+FVP_CONFIG[bp.virtio_net.enabled] ?= "1"
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetworking] ?= "1"
+# Tell testimage to connect to localhost:2222, and forward that to SSH in the FVP.
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] = "2222=22"
+FVP_CONFIG[bp.virtio_rng.enabled] ?= "1"
+FVP_CONFIG[cache_state_modelled] ?= "0"
+FVP_CONFIG[cluster0.check_memory_attributes] ?= "0"
+FVP_CONFIG[cluster1.check_memory_attributes] ?= "0"
+FVP_CONFIG[cluster0.stage12_tlb_size] ?= "1024"
+FVP_CONFIG[cluster1.stage12_tlb_size] ?= "1024"
+FVP_CONFIG[bp.secureflashloader.fname] ?= "bl1-fvp.bin"
+FVP_CONFIG[bp.flashloader0.fname] ?= "fip-fvp.bin"
+FVP_CONFIG[bp.virtioblockdevice.image_path] ?= "${IMAGE_NAME}.wic"
+# Set the baseline to ARMv8.4, as the default is 8.0.
+FVP_CONFIG[cluster0.has_arm_v8-4] = "1"
+FVP_CONFIG[cluster1.has_arm_v8-4] = "1"
+FVP_CONSOLES[default] = "terminal_0"
+FVP_TERMINALS[bp.terminal_0] ?= "Console"
+FVP_TERMINALS[bp.terminal_1] ?= ""
+FVP_TERMINALS[bp.terminal_2] ?= ""
+FVP_TERMINALS[bp.terminal_3] ?= ""
+FVP_CONFIG[bp.secure_memory] ?= "1"

sources/meta-arm/meta-arm-bsp/conf/machine/include/corstone1000.inc

@@ -0,0 +1,65 @@
+require conf/machine/include/arm/armv8a/tune-cortexa35.inc
+
+MACHINEOVERRIDES =. "corstone1000:"
+
+# TF-M
+PREFERRED_VERSION_trusted-firmware-m ?= "2.0.%"
+
+# TF-A
+TFA_PLATFORM = "corstone1000"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.10.%"
+PREFERRED_VERSION_tf-a-tests ?= "2.10.%"
+
+TFA_BL2_BINARY = "bl2-corstone1000.bin"
+TFA_FIP_BINARY = "fip-corstone1000.bin"
+
+# optee
+PREFERRED_VERSION_optee-os ?= "4.1.%"
+
+# Trusted Services
+TS_PLATFORM = "arm/corstone1000"
+TS_SP_SE_PROXY_CONFIG = "corstone1000"
+# Include smm-gateway and se-proxy SPs into optee-os binary
+MACHINE_FEATURES += "ts-smm-gateway ts-se-proxy"
+
+# u-boot
+PREFERRED_VERSION_u-boot ?= "2023.07%"
+MACHINE_FEATURES += "efi"
+EFI_PROVIDER ?= "grub-efi"
+
+# Grub
+LINUX_KERNEL_ARGS ?= "earlycon=pl011,0x1a510000 console=ttyAMA0,115200"
+GRUB_LINUX_APPEND ?= "${LINUX_KERNEL_ARGS}"
+IMAGE_CMD:wic[vardeps] += "GRUB_LINUX_APPEND"
+
+# Linux kernel
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+PREFERRED_VERSION_linux-yocto ?= "6.6.%"
+KERNEL_IMAGETYPE = "Image"
+KERNEL_IMAGETYPE:firmware = "Image.gz"
+# add FF-A support in the kernel
+MACHINE_FEATURES += "arm-ffa"
+# enable this feature for kernel debugging
+# MACHINE_FEATURES += "corstone1000_kernel_debug"
+
+# login terminal serial port settings
+SERIAL_CONSOLES ?= "115200;ttyAMA0"
+
+IMAGE_FSTYPES += "wic"
+# Need to clear the suffix so TESTIMAGE_AUTO works
+IMAGE_NAME_SUFFIX = ""
+WKS_FILE ?= "efi-disk-no-swap.wks.in"
+WKS_FILE:firmware ?= "corstone1000-flash-firmware.wks.in"
+
+# making sure EXTRA_IMAGEDEPENDS will be used while creating the image
+WKS_FILE_DEPENDS:append = " ${EXTRA_IMAGEDEPENDS}"
+
+# If not building under the firmware multiconf we need to build the actual firmware
+FIRMWARE_DEPLOYMENT ?= "firmware-deploy-image"
+FIRMWARE_DEPLOYMENT:firmware ?= ""
+EXTRA_IMAGEDEPENDS += "${FIRMWARE_DEPLOYMENT}"
+
+ARM_SYSTEMREADY_FIRMWARE = "${FIRMWARE_DEPLOYMENT}:do_deploy \
+                            corstone1000-esp-image:do_image_complete \
+                           "
+ARM_SYSTEMREADY_ACS_CONSOLE ?= "default"

sources/meta-arm/meta-arm-bsp/conf/machine/juno.conf

@@ -0,0 +1,30 @@
+# Configuration for juno development board
+
+#@TYPE: Machine
+#@NAME: Juno machine
+#@DESCRIPTION: Machine configuration for Juno
+
+TUNE_FEATURES = "aarch64"
+
+require conf/machine/include/arm/arch-armv8a.inc
+
+MACHINE_FEATURES = "usbhost usbgadget alsa screen wifi bluetooth optee pci"
+
+KERNEL_IMAGETYPE = "Image.gz"
+KERNEL_DEVICETREE = "arm/juno.dtb arm/juno-r1.dtb arm/juno-r2.dtb"
+
+IMAGE_FSTYPES += "tar.bz2 ext4 cpio.gz"
+
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
+
+EXTRA_IMAGEDEPENDS += "trusted-firmware-a virtual/bootloader firmware-image-juno"
+
+# Juno u-boot configuration
+UBOOT_MACHINE = "vexpress_aemv8a_juno_defconfig"
+
+INITRAMFS_IMAGE_BUNDLE ?= "1"
+INITRAMFS_IMAGE = "core-image-minimal"
+IMAGE_NAME_SUFFIX = ""

sources/meta-arm/meta-arm-bsp/conf/machine/musca-b1.conf

@@ -0,0 +1,23 @@
+# Configuration for Musca-B1 development board
+
+#@TYPE: Machine
+#@NAME: Musca-B1 machine
+#@DESCRIPTION: Machine configuration for Musca-B1
+
+DEFAULTTUNE ?= "armv8m-main"
+require conf/machine/include/arm/armv8-m/tune-cortexm33.inc
+
+# GLIBC will not work with Cortex-M.
+TCLIBC = "newlib"
+
+# For runqemu
+IMAGE_FSTYPES += "ext4"
+IMAGE_CLASSES += "qemuboot"
+QB_SYSTEM_NAME = "qemu-system-arm"
+QB_MACHINE = "-machine musca-b1"
+QB_CPU = "-cpu cortex-m33"
+QB_GRAPHICS = "-nographic -vga none"
+QB_MEM = "512k"
+QB_RNG = ""
+
+TFM_PLATFORM = "arm/musca_b1"

sources/meta-arm/meta-arm-bsp/conf/machine/musca-s1.conf

@@ -0,0 +1,22 @@
+# Configuration for Musca-S1 development board
+
+#@TYPE: Machine
+#@NAME: Musca-S1 machine
+#@DESCRIPTION: Machine configuration for Musca-S1
+
+require conf/machine/include/arm/armv8-m/tune-cortexm33.inc
+
+# GLIBC will not work with Cortex-M.
+TCLIBC = "newlib"
+
+# For runqemu
+IMAGE_FSTYPES += "ext4"
+IMAGE_CLASSES += "qemuboot"
+QB_SYSTEM_NAME = "qemu-system-arm"
+QB_MACHINE = "-machine musca-s1"
+QB_CPU = "-cpu cortex-m33"
+QB_GRAPHICS = "-nographic -vga none"
+QB_MEM = "512k"
+QB_RNG = ""
+
+TFM_PLATFORM = "arm/musca_s1"

sources/meta-arm/meta-arm-bsp/conf/machine/n1sdp.conf

@@ -0,0 +1,51 @@
+# Configuration for Arm N1SDP development board
+
+#@TYPE: Machine
+#@NAME: N1SDP machine
+#@DESCRIPTION: Machine configuration for N1SDP
+
+require conf/machine/include/arm/armv8-2a/tune-neoversen1.inc
+
+KERNEL_IMAGETYPE = "Image"
+
+IMAGE_FSTYPES += "wic wic.gz wic.bmap tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+# Set default WKS
+WKS_FILE ?= "n1sdp-efidisk.wks"
+IMAGE_EFI_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"
+WKS_FILE_DEPENDS:append = " ${EXTRA_IMAGEDEPENDS}"
+
+# Use kernel provided by yocto
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+PREFERRED_VERSION_linux-yocto ?= "6.6%"
+
+# RTL8168E Gigabit Ethernet Controller is attached to the PCIe interface
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "linux-firmware-rtl8168"
+
+# TF-A
+EXTRA_IMAGEDEPENDS += "trusted-firmware-a"
+TFA_PLATFORM = "n1sdp"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.10.%"
+PREFERRED_VERSION_tf-a-tests ?= "2.10.%"
+
+# SCP
+EXTRA_IMAGEDEPENDS += "virtual/control-processor-firmware"
+
+#UEFI EDK2 firmware
+EXTRA_IMAGEDEPENDS += "edk2-firmware"
+PREFERRED_VERSION_edk2-firmware ?= "202311"
+
+#optee
+PREFERRED_VERSION_optee-os ?= "4.1.%"
+PREFERRED_VERSION_optee-os-tadevkit ?= "4.1.%"
+PREFERRED_VERSION_optee-test ?= "4.1.%"
+PREFERRED_VERSION_optee-client ?= "4.1.%"
+
+#grub-efi
+EFI_PROVIDER ?= "grub-efi"
+MACHINE_FEATURES += "efi"
+
+# SD-Card firmware
+EXTRA_IMAGEDEPENDS += "sdcard-image-n1sdp"

sources/meta-arm/meta-arm-bsp/conf/machine/sbsa-ref.conf

@@ -0,0 +1,43 @@
+#@TYPE: Machine
+#@NAME: sbsa-ref
+#@DESCRIPTION: Reference SBSA machine in qemu-system-aarch64 on Neoverse N2
+
+require conf/machine/include/arm/armv9a/tune-neoversen2.inc
+require conf/machine/include/qemu.inc
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+KERNEL_IMAGETYPE = "Image"
+MACHINE_EXTRA_RRECOMMENDS += "kernel-modules"
+
+MACHINE_FEATURES = " alsa bluetooth efi qemu-usermode rtc screen usbhost vfat wifi"
+
+IMAGE_FSTYPES += "wic.qcow2"
+
+# This unique WIC file is necessary because kernel boot args cannot be passed
+# because there is no default kernel (see below).  There is no default kernel
+# because QEMU will only allow firmware or kernel to be passed in as a
+# parameter, and we need the firmware.  So, to allow for "ip=dhcp" as a kernel
+# boot arg (which we need for testimage), we have to have a WIC file unique to
+# this platform.
+WKS_FILE = "qemu-efi-disk.wks.in"
+
+EFI_PROVIDER ?= "${@bb.utils.contains("DISTRO_FEATURES", "systemd", "systemd-boot", "grub-efi", d)}"
+
+SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
+
+EXTRA_IMAGEDEPENDS += "edk2-firmware"
+
+QB_SYSTEM_NAME = "qemu-system-aarch64"
+QB_MACHINE = "-machine sbsa-ref"
+QB_CPU = "-cpu neoverse-n2"
+QB_MEM = "-m 1024"
+QB_DEFAULT_FSTYPE = "wic.qcow2"
+QB_NETWORK_DEVICE = "-device virtio-net-pci,netdev=net0,mac=@MAC@"
+QB_DRIVE_TYPE = "/dev/hd"
+QB_ROOTFS_OPT = "-drive file=@ROOTFS@,if=ide,format=qcow2"
+QB_DEFAULT_KERNEL = "none"
+QB_OPT_APPEND = "-device usb-tablet -device usb-kbd -pflash @DEPLOY_DIR_IMAGE@/SBSA_FLASH0.fd -pflash @DEPLOY_DIR_IMAGE@/SBSA_FLASH1.fd"
+QB_SERIAL_OPT = "-device virtio-serial-pci -chardev null,id=virtcon -device virtconsole,chardev=virtcon"
+QB_TCPSERIAL_OPT = "-device virtio-serial-pci -chardev socket,id=virtcon,port=@PORT@,host=127.0.0.1 -device virtconsole,chardev=virtcon"
+# sbsa-ref is a true virtual machine so can't use KVM
+QEMU_USE_KVM = "0"

sources/meta-arm/meta-arm-bsp/conf/machine/sgi575.conf

@@ -0,0 +1,24 @@
+# Configuration for Arm SGI575 development board
+
+#@TYPE: Machine
+#@NAME: SGI575
+#@DESCRIPTION: Machine configuration for SGI575
+
+require conf/machine/include/arm/armv8-2a/tune-cortexa75.inc
+
+EXTRA_IMAGEDEPENDS += "virtual/control-processor-firmware"
+
+EXTRA_IMAGEDEPENDS += "trusted-firmware-a"
+
+KERNEL_IMAGETYPE ?= "Image"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+SERIAL_CONSOLES = "115200;ttyAMA0"
+
+#grub-efi
+EFI_PROVIDER ?= "grub-efi"
+MACHINE_FEATURES += "efi"
+
+IMAGE_FSTYPES += "cpio.gz wic"
+
+WKS_FILE ?= "sgi575-efidisk.wks"
+WKS_FILE_DEPENDS:append = " ${EXTRA_IMAGEDEPENDS}"