Complete Yocto mirror with license table for TQMa6UL (2038-compliance)

- 264 license table entries with exact download URLs (224/264 resolved)
- Complete sources/ directory with all BitBake recipes
- Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl)
- Full traceability for Softwarefreigabeantrag
- GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4
- License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)

sources/meta-freescale/conf/machine/include/imx8mp-evk.inc

@@ -0,0 +1,74 @@
+MACHINEOVERRIDES =. "mx8mp:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+# Mainline BSP defaults to "generic" cortexa53 configuration,
+# adjust it here to include crypto extension which enables
+# inline NEON and FPU code generation
+DEFAULTTUNE:use-mainline-bsp = "cortexa53-crypto"
+
+MACHINE_FEATURES += "pci wifi bluetooth nxp8997-pcie nxp8997-sdio nxp9098-pcie nxp9098-sdio"
+
+# NXP BSP can consume proprietary jailhouse and Marvell drivers
+# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
+# a full support for it yet.
+MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
+
+# Mainline kernel contains only one DTB file for
+# imx8mpevk machine
+KERNEL_DEVICETREE = " \
+    freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
+"
+
+UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
+
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
+
+UBOOT_SUFFIX = "bin"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd]      = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
+UBOOT_CONFIG[ecc]     = "${UBOOT_CONFIG_BASENAME}_inline_ecc_defconfig"
+
+SPL_BINARY = "spl/u-boot-spl.bin"
+
+ATF_PLATFORM = "imx8mp"
+
+IMXBOOT_TARGETS = \
+    "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', \
+                                                  '${IMXBOOT_TARGETS_BASENAME}', d)}"
+
+IMX_BOOT_SOC_TARGET = "iMX8MP"
+
+SERIAL_CONSOLES = "115200;ttymxc1"
+
+# Add support for Syslinux to mainline BSP.
+# U-Boot has the Distro Boot mode enabled by default, which
+# require that either Syslinux to be enabled, or a boot script
+# to be used to define the boot process.
+# We opt-in for Syslinux, since it is designated as a preferred
+# distro boot mode according to the U-Boot documentation.
+UBOOT_EXTLINUX:use-mainline-bsp = "1"
+UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
+UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
+
+UBOOT_EXTLINUX_MENU_DESCRIPTION:default:use-mainline-bsp = "i.MX8M Plus EVK"
+UBOOT_EXTLINUX_FDT:default:use-mainline-bsp     = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
+UBOOT_EXTLINUX_CONSOLE:default:use-mainline-bsp = "console=${console}"
+UBOOT_EXTLINUX_ROOT:default:use-mainline-bsp    = "root=/dev/mmcblk1p2"
+
+# Add extlinux.conf to the lis of files, which are deployed onto the
+# boot partition
+IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
+
+LOADADDR = ""
+UBOOT_MAKE_TARGET = "all"
+IMX_BOOT_SEEK = "32"
+
+OPTEE_BIN_EXT = "8mp"
+TEE_LOAD_ADDR = "0x56000000"
+
+# Add additional firmware
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"