Complete Yocto mirror with license table for TQMa6UL (2038-compliance)

- 264 license table entries with exact download URLs (224/264 resolved)
- Complete sources/ directory with all BitBake recipes
- Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl)
- Full traceability for Softwarefreigabeantrag
- GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4
- License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)

sources/poky/meta/recipes-extended/shadow/files/pam.d/chfn

@@ -0,0 +1,14 @@
+#
+# The PAM configuration file for the Shadow `chfn' service
+#
+
+# This allows root to change user infomation without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+auth       include      common-auth
+account    include      common-account
+session    include      common-session

sources/poky/meta/recipes-extended/shadow/files/pam.d/chpasswd

@@ -0,0 +1,6 @@
+# The PAM configuration file for the Shadow 'chpasswd' service
+#
+
+auth       sufficient   pam_rootok.so
+account    required     pam_permit.so
+password   include      common-password

sources/poky/meta/recipes-extended/shadow/files/pam.d/chsh

@@ -0,0 +1,19 @@
+#
+# The PAM configuration file for the Shadow `chsh' service
+#
+
+# This will not allow a user to change their shell unless
+# their current one is listed in /etc/shells. This keeps
+# accounts with special shells from changing them.
+auth       required   pam_shells.so
+
+# This allows root to change user shell without being
+# prompted for a password
+auth		sufficient	pam_rootok.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+auth       include      common-auth
+account    include      common-account
+session    include      common-session

sources/poky/meta/recipes-extended/shadow/files/pam.d/login

@@ -0,0 +1,77 @@
+#
+# The PAM configuration file for the Shadow `login' service
+#
+
+# Enforce a minimal delay in case of failure (in microseconds).
+# (Replaces the `FAIL_DELAY' setting from login.defs)
+# Note that other modules may require another minimal delay. (for example,
+# to disable any delay, you should add the nodelay option to pam_unix)
+auth       optional   pam_faildelay.so  delay=3000000
+
+# Outputs an issue file prior to each login prompt (Replaces the
+# ISSUE_FILE option from login.defs). Uncomment for use
+# auth       required   pam_issue.so issue=/etc/issue
+
+# Disallows root logins except on tty's listed in /etc/securetty
+# (Replaces the `CONSOLE' setting from login.defs)
+# Note that it is included as a "requisite" module. No password prompts will
+# be displayed if this module fails to avoid having the root password
+# transmitted on unsecure ttys.
+# You can change it to a "required" module if you think it permits to
+# guess valid user names of your system (invalid user names are considered
+# as possibly being root).
+auth       [success=ok ignore=ignore user_unknown=ignore default=die]  pam_securetty.so
+
+# Disallows other than root logins when /etc/nologin exists
+# (Replaces the `NOLOGINS_FILE' option from login.defs)
+auth       requisite  pam_nologin.so
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+
+# Standard Un*x authentication.
+auth       include      common-auth
+
+# This allows certain extra groups to be granted to a user
+# based on things like time of day, tty, service, and user.
+# Please edit /etc/security/group.conf to fit your needs
+# (Replaces the `CONSOLE_GROUPS' option in login.defs)
+auth       optional   pam_group.so
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restrainst on logins.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# Uncomment and edit /etc/security/access.conf if you need to
+# set access limits.
+# (Replaces /etc/login.access file)
+# account  required       pam_access.so
+
+# Sets up user limits according to /etc/security/limits.conf
+# (Replaces the use of /etc/limits in old login)
+session    required   pam_limits.so
+
+# Prints the motd upon succesful login
+# (Replaces the `MOTD_FILE' option in login.defs)
+session    optional   pam_motd.so
+
+# Prints the status of the user's mailbox upon succesful login
+# (Replaces the `MAIL_CHECK_ENAB' option from login.defs). 
+#
+# This also defines the MAIL environment variable
+# However, userdel also needs MAIL_DIR and MAIL_FILE variables
+# in /etc/login.defs to make sure that removing a user 
+# also removes the user's mail spool file.
+# See comments in /etc/login.defs
+session    optional   pam_mail.so standard
+
+# Standard Un*x account and session
+account    include      common-account
+password   include      common-password
+session    include      common-session

sources/poky/meta/recipes-extended/shadow/files/pam.d/newusers

@@ -0,0 +1,6 @@
+# The PAM configuration file for the Shadow 'newusers' service
+#
+
+auth       sufficient   pam_rootok.so
+account    required     pam_permit.so
+password   include      common-password

sources/poky/meta/recipes-extended/shadow/files/pam.d/passwd

@@ -0,0 +1,5 @@
+#
+# The PAM configuration file for the Shadow `passwd' service
+#
+
+password   include      common-password

sources/poky/meta/recipes-extended/shadow/files/pam.d/su

@@ -0,0 +1,57 @@
+#
+# The PAM configuration file for the Shadow `su' service
+#
+
+# This allows root to su without passwords (normal operation)
+auth       sufficient pam_rootok.so
+
+# Uncomment this to force users to be a member of group root
+# before they can use `su'. You can also add "group=foo"
+# to the end of this line if you want to use a group other
+# than the default "root" (but this may have side effect of
+# denying "root" user, unless she's a member of "foo" or explicitly
+# permitted earlier by e.g. "sufficient pam_rootok.so").
+# (Replaces the `SU_WHEEL_ONLY' option from login.defs)
+# auth       required   pam_wheel.so
+
+# Uncomment this if you want wheel members to be able to
+# su without a password.
+# auth       sufficient pam_wheel.so trust
+
+# Uncomment this if you want members of a specific group to not
+# be allowed to use su at all.
+# auth       required   pam_wheel.so deny group=nosu
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restrainst on su usage.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+
+# Defines the MAIL environment variable
+# However, userdel also needs MAIL_DIR and MAIL_FILE variables
+# in /etc/login.defs to make sure that removing a user 
+# also removes the user's mail spool file.
+# See comments in /etc/login.defs
+#
+# "nopen" stands to avoid reporting new mail when su'ing to another user
+session    optional   pam_mail.so nopen
+
+# Sets up user limits, please uncomment and read /etc/security/limits.conf
+# to enable this functionality.
+# (Replaces the use of /etc/limits in old login)
+# session    required   pam_limits.so
+
+# The standard Unix authentication modules, used with
+# NIS (man nsswitch) as well as normal /etc/passwd and
+# /etc/shadow entries.
+auth       include      common-auth
+account    include      common-account
+session    include      common-session