Complete Yocto mirror with license table for TQMa6UL (2038-compliance)

- 264 license table entries with exact download URLs (224/264 resolved)
- Complete sources/ directory with all BitBake recipes
- Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl)
- Full traceability for Softwarefreigabeantrag
- GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4
- License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)

sources/poky/meta-poky/conf/distro/include/gcsections.inc

@@ -0,0 +1,36 @@
+CFLAGS_SECTION_REMOVAL = "-ffunction-sections -fdata-sections"
+LDFLAGS_SECTION_REMOVAL = "-Wl,--gc-sections"
+
+# packages with build problems using sections
+CFLAGS_SECTION_REMOVAL:pn-glibc = ""
+LDFLAGS_SECTION_REMOVAL:pn-glibc = ""
+CFLAGS_SECTION_REMOVAL:pn-cairo = ""
+LDFLAGS_SECTION_REMOVAL:pn-cairo = ""
+CFLAGS_SECTION_REMOVAL:pn-perl = ""
+LDFLAGS_SECTION_REMOVAL:pn-perl = ""
+CFLAGS_SECTION_REMOVAL:pn-grub-efi = ""
+LDFLAGS_SECTION_REMOVAL:pn-grub-efi = ""
+CFLAGS_SECTION_REMOVAL:pn-grub = ""
+LDFLAGS_SECTION_REMOVAL:pn-grub = ""
+
+# SDK packages with build problems using sections
+CFLAGS_SECTION_REMOVAL:pn-nativesdk-glibc = ""
+LDFLAGS_SECTION_REMOVAL:pn-nativesdk-glibc = ""
+CFLAGS_SECTION_REMOVAL:pn-nativesdk-cairo = ""
+LDFLAGS_SECTION_REMOVAL:pn-nativesdk-cairo = ""
+CFLAGS_SECTION_REMOVAL:pn-nativesdk-mingw-w64-runtime = ""
+LDFLAGS_SECTION_REMOVAL:pn-nativesdk-mingw-w64-runtime = ""
+CFLAGS_SECTION_REMOVAL:pn-nativesdk-perl = ""
+LDFLAGS_SECTION_REMOVAL:pn-nativesdk-perl = ""
+CFLAGS_SECTION_REMOVAL:pn-nativesdk-mingw-w64-winpthreads = ""
+LDFLAGS_SECTION_REMOVAL:pn-nativesdk-mingw-w64-winpthreads = ""
+
+# set default for target
+CFLAGS:append:class-target = " ${CFLAGS_SECTION_REMOVAL}"
+CXXFLAGS:append:class-target = " ${CFLAGS_SECTION_REMOVAL}"
+LDFLAGS:append:class-target = " ${LDFLAGS_SECTION_REMOVAL}"
+
+# set default for nativesdk
+CFLAGS:append:class-nativesdk = " ${CFLAGS_SECTION_REMOVAL}"
+CXXFLAGS:append:class-nativesdk = " ${CFLAGS_SECTION_REMOVAL}"
+LDFLAGS:append:class-nativesdk = " ${LDFLAGS_SECTION_REMOVAL}"

sources/poky/meta-poky/conf/distro/include/poky-distro-alt-test-config.inc

@@ -0,0 +1,8 @@
+# Add extra DISTRO_FEATUREs
+DISTRO_FEATURES:append = " pam usrmerge"
+
+# Use our alternate kernel version
+PREFERRED_VERSION_linux-yocto = "6.6%"
+
+# Ensure the kernel nfs server is enabled
+KERNEL_FEATURES:append:pn-linux-yocto = " features/nfsd/nfsd-enable.scc"

sources/poky/meta-poky/conf/distro/include/poky-floating-revisions.inc

@@ -0,0 +1,22 @@
+#
+# Set recipe versions to auto-rev for cutting edge testing
+#
+
+INHERIT += "poky-bleeding"
+
+POKY_AUTOREV_RECIPES = "\
+    libmatchbox \
+    opkg-utils \
+    matchbox-config-gtk \
+    matchbox-desktop \
+    matchbox-keyboard \
+    matchbox-panel-2 \
+    matchbox-terminal \
+    matchbox-theme-sato \
+    matchbox-wm \
+    pseudo \
+    puzzles \
+    sato-icon-theme \
+    sato-screenshot \
+    settings-daemon \
+"

sources/poky/meta-poky/conf/distro/include/poky-world-exclude.inc

@@ -0,0 +1,4 @@
+#
+# Things we exlude from world testing within the reference distro
+#
+

sources/poky/meta-poky/conf/distro/poky-altcfg.conf

@@ -0,0 +1,17 @@
+#
+# An example of subclassing a distro, primarily used for testing alternate configuration
+# combinations on the Yocto Project autobuilder
+#
+
+PACKAGE_CLASSES ?= "package_ipk"
+require conf/distro/poky.conf
+
+DISTRO = "poky-altcfg"
+DISTROOVERRIDES = "poky:poky-altcfg"
+#DISTROOVERRIDES = "poky:linuxstdbase"
+
+POKY_INIT_MANAGER:poky-altcfg = "systemd"
+# systemd isn't suitable with musl
+POKY_INIT_MANAGER:poky-altcfg:libc-musl = "sysvinit"
+
+require conf/distro/include/poky-distro-alt-test-config.inc

sources/poky/meta-poky/conf/distro/poky-bleeding.conf

@@ -0,0 +1,7 @@
+PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-dev"
+
+require conf/distro/include/poky-floating-revisions.inc
+require conf/distro/poky.conf
+
+DISTRO = "poky-bleeding"
+DISTROOVERRIDES = "poky"

sources/poky/meta-poky/conf/distro/poky-tiny.conf

@@ -0,0 +1,128 @@
+# Distribution definition for: poky-tiny
+#
+# Copyright (c) 2011, Intel Corporation.
+# All rights reserved.
+#
+# This file is released under the MIT license as described in
+# ../meta/COPYING.MIT.
+#
+# Poky-tiny is intended to define a tiny Linux system comprised of a
+# Linux kernel tailored to support each specific MACHINE and busybox.
+# Poky-tiny sets some basic policy to ensure a usable system while still
+# keeping the rootfs and kernel image as small as possible.
+#
+# The policies defined are intended to meet the following goals:
+# o Serial consoles only (no framebuffer or VGA console)
+# o Basic support for IPV4 networking
+# o Single user ash shell
+# o Static images (no support for adding packages or libraries later)
+# o Read-only or RAMFS root filesystem
+# o Combined Linux kernel + rootfs in under 4MB
+# o Allow the user to select between eglibc or uclibc with the TCLIBC variable
+#
+# This is currently a partial definition, the following tasks remain:
+# [ ] Integrate linux-yocto-tiny ktype into linux-yocto
+# [ ] Define linux-yocto-tiny configs for all supported BSPs
+# [ ] Drop ldconfig from the installation
+# [ ] Modify the runqemu scripts to work with ext2 parameter:
+#     runqemu qemux86 qemuparams="-nographic" bootparams="console=ttyS0,115200 root=0800"
+# [ ] Modify busybox to allow for DISTRO_FEATURES-like configuration
+
+require conf/distro/poky.conf
+require conf/distro/include/gcsections.inc
+
+DISTRO = "poky-tiny"
+DISTRO_NAME = "Poky Tiny"
+DISTROOVERRIDES = "poky:poky-tiny"
+TCLIBC = "musl"
+
+FULL_OPTIMIZATION="-Os -pipe ${DEBUG_FLAGS}"
+
+# FIXME: consider adding a new "tiny" feature
+#DISTRO_FEATURES_append = " tiny"
+
+# Distro config is evaluated after the machine config, so we have to explicitly
+# set the kernel provider to override a machine config.
+PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny"
+PREFERRED_VERSION_linux-yocto-tiny ?= "6.6%"
+
+# We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny
+#POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot"
+# Drop kernel-module-af-packet from RRECOMMENDS
+POKY_DEFAULT_EXTRA_RRECOMMENDS = ""
+
+# FIXME: what should we do with this?
+TCLIBCAPPEND = ""
+
+# Disable wide char support for ncurses as we don't include it in
+# in the LIBC features below.
+# Leave native enable to avoid build failures
+ENABLE_WIDEC = "false"
+ENABLE_WIDEC:class-native = "true"
+
+# Drop native language support. This removes the
+# eglibc->bash->gettext->libc-posix-clang-wchar dependency.
+USE_NLS="no"
+# As we don't have native language support, don't install locales into images
+IMAGE_LINGUAS = ""
+
+# Comment out any of the lines below to disable them in the build
+# DISTRO_FEATURES options:
+# alsa bluetooth ext2 pcmcia usbgadget usbhost wifi nfs zeroconf pci
+DISTRO_FEATURES_TINY = "pci"
+DISTRO_FEATURES_NET = "ipv4 ipv6"
+DISTRO_FEATURES_USB = "usbhost"
+#DISTRO_FEATURES_USBGADGET = "usbgadget"
+#DISTRO_FEATURES_WIFI = "wifi"
+
+DISTRO_FEATURES = "${DISTRO_FEATURES_TINY} \
+                   ${DISTRO_FEATURES_NET} \
+                   ${DISTRO_FEATURES_USB} \
+                   ${DISTRO_FEATURES_USBGADGET} \
+                   ${DISTRO_FEATURES_WIFI} \
+                  "
+
+DISTRO_FEATURES:class-native = "${DISTRO_FEATURES_DEFAULT} ${POKY_DEFAULT_DISTRO_FEATURES}"
+DISTRO_FEATURES:class-nativesdk = "${DISTRO_FEATURES_DEFAULT} ${POKY_DEFAULT_DISTRO_FEATURES}"
+
+# enable mdev/busybox for init
+POKY_INIT_MANAGER:poky-tiny = "mdev-busybox"
+
+# FIXME: Consider adding "modules" to MACHINE_FEATURES and using that in
+# packagegroup-core-base to select modutils-initscripts or not.  Similar with "net" and
+# netbase.
+
+# By default we only support initramfs. We don't build live as that
+# pulls in a lot of dependencies for the live image and the installer, like
+# udev, grub, etc.  These pull in gettext, which fails to build with wide
+# character support.
+IMAGE_FSTYPES = "cpio.gz"
+QB_DEFAULT_FSTYPE = "cpio.gz"
+
+# Drop v86d from qemu dependency list (we support serial)
+# Drop grub from meta-intel BSPs
+# FIXME: A different mechanism is needed here. We could define -tiny
+#        variants of all compatible machines, but that leads to a lot
+#        more machine configs to maintain long term.
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = ""
+
+# The mtrace script included by eglibc is a perl script. This means the system
+# will build perl in case this package is installed. Since we don't care about
+# this script for the purposes of tiny, remove the dependency from here.
+RDEPENDS:${PN}-mtrace:pn-eglibc = ""
+
+SKIP_RECIPE[build-appliance-image] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-rt] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-rt-sdk] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-sato] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-sato-dev] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-sato-sdk] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-x11] = "not buildable with poky-tiny"
+SKIP_RECIPE[core-image-weston] = "not buildable with poky-tiny"
+
+# Disable python usage in opkg-utils since it won't build with tiny config
+PACKAGECONFIG:remove:pn-opkg-utils = "python"
+
+# If shadow-base is brought into the image, logins will fail because it
+# doesn't have the heuristics to work when CONFIG_MULTIUSER is unset.
+PACKAGE_EXCLUDE += "shadow-base"

sources/poky/meta-poky/conf/distro/poky.conf

@@ -0,0 +1,81 @@
+DISTRO = "poky"
+DISTRO_NAME = "Poky (Yocto Project Reference Distro)"
+DISTRO_VERSION = "5.0.11"
+DISTRO_CODENAME = "scarthgap"
+SDK_VENDOR = "-pokysdk"
+SDK_VERSION = "${@d.getVar('DISTRO_VERSION').replace('snapshot-${METADATA_REVISION}', 'snapshot')}"
+SDK_VERSION[vardepvalue] = "${SDK_VERSION}"
+
+MAINTAINER = "Poky Maintainers <poky@lists.yoctoproject.org>"
+
+TARGET_VENDOR = "-poky"
+
+LOCALCONF_VERSION = "2"
+
+# Override these in poky based distros
+POKY_DEFAULT_DISTRO_FEATURES = "opengl ptest multiarch wayland vulkan"
+POKY_DEFAULT_EXTRA_RDEPENDS = "packagegroup-core-boot"
+POKY_DEFAULT_EXTRA_RRECOMMENDS = "kernel-module-af-packet"
+
+DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} ${POKY_DEFAULT_DISTRO_FEATURES}"
+
+PREFERRED_VERSION_linux-yocto ?= "6.6%"
+PREFERRED_VERSION_linux-yocto-rt ?= "6.6%"
+
+SDK_NAME = "${DISTRO}-${TCLIBC}-${SDKMACHINE}-${IMAGE_BASENAME}-${TUNE_PKGARCH}-${MACHINE}"
+SDKPATHINSTALL = "/opt/${DISTRO}/${SDK_VERSION}"
+
+DISTRO_EXTRA_RDEPENDS += "${POKY_DEFAULT_EXTRA_RDEPENDS}"
+DISTRO_EXTRA_RRECOMMENDS += "${POKY_DEFAULT_EXTRA_RRECOMMENDS}"
+
+TCLIBCAPPEND = ""
+
+PACKAGE_CLASSES ?= "package_rpm"
+
+SANITY_TESTED_DISTROS ?= " \
+            poky-4.3 \n \
+            poky-5.0 \n \
+            ubuntu-20.04 \n \
+            ubuntu-22.04 \n \
+            ubuntu-23.04 \n \
+            ubuntu-24.04 \n \
+            fedora-38 \n \
+            fedora-39 \n \
+            fedora-40 \n \
+            centosstream-8 \n \
+            debian-11 \n \
+            debian-12 \n \
+            opensuseleap-15.4 \n \
+            almalinux-8.8 \n \
+            almalinux-8.9 \n \
+            almalinux-8.10 \n \
+            almalinux-9.2 \n \
+            almalinux-9.4 \n \
+            rocky-9 \n \
+            "
+# add poky sanity bbclass
+INHERIT += "poky-sanity"
+
+# QA check settings - a little stricter than the OE-Core defaults
+# (none currently necessary as we now match OE-Core)
+#WARN_TO_ERROR_QA = "X"
+#WARN_QA_remove = "${WARN_TO_ERROR_QA}"
+#ERROR_QA_append = " ${WARN_TO_ERROR_QA}"
+
+require conf/distro/include/poky-world-exclude.inc
+require conf/distro/include/no-static-libs.inc
+require conf/distro/include/yocto-uninative.inc
+require conf/distro/include/security_flags.inc
+INHERIT += "uninative"
+
+BB_SIGNATURE_HANDLER ?= "OEEquivHash"
+BB_HASHSERVE ??= "auto"
+
+POKY_INIT_MANAGER = "sysvinit"
+INIT_MANAGER ?= "${POKY_INIT_MANAGER}"
+
+# We need debug symbols so that SPDX license manifests for the kernel work
+KERNEL_EXTRA_FEATURES:append = " features/debug/debug-kernel.scc"
+
+# Enable creation of SPDX manifests by default
+INHERIT += "create-spdx"

sources/poky/meta-poky/conf/layer.conf

@@ -0,0 +1,20 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH =. "${LAYERDIR}:"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+            ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "yocto"
+BBFILE_PATTERN_yocto = "^${LAYERDIR}/"
+BBFILE_PRIORITY_yocto = "5"
+
+LAYERSERIES_COMPAT_yocto = "scarthgap"
+
+# This should only be incremented on significant changes that will
+# cause compatibility issues with other layers
+LAYERVERSION_yocto = "3"
+
+LAYERDEPENDS_yocto = "core"
+
+REQUIRED_POKY_BBLAYERS_CONF_VERSION = "2"

sources/poky/meta-poky/conf/templates/default/bblayers.conf.sample

@@ -0,0 +1,12 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-poky \
+  ##OEROOT##/meta-yocto-bsp \
+  "

sources/poky/meta-poky/conf/templates/default/conf-notes.txt

@@ -0,0 +1,19 @@
+
+### Shell environment set up for builds. ###
+
+You can now run 'bitbake <target>'
+
+Common targets are:
+    core-image-minimal
+    core-image-full-cmdline
+    core-image-sato
+    core-image-weston
+    meta-toolchain
+    meta-ide-support
+
+You can also run generated qemu images with a command like 'runqemu qemux86-64'.
+
+Other commonly useful commands are:
+ - 'devtool' and 'recipetool' handle common recipe tasks
+ - 'bitbake-layers' handles common layer tasks
+ - 'oe-pkgdata-util' handles common target package tasks

sources/poky/meta-poky/conf/templates/default/conf-summary.txt

@@ -0,0 +1 @@
+This is the default build configuration for the Poky reference distribution.

sources/poky/meta-poky/conf/templates/default/local.conf.sample

@@ -0,0 +1,285 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at
+# local.conf.sample.extended which contains other examples of configuration which
+# can be placed in this file but new users likely won't need any of them
+# initially. There's also site.conf.sample which contains examples of site specific
+# information such as proxy server addresses.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericarm64"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#
+# This sets the default machine to be qemux86-64 if no other machine is selected:
+MACHINE ??= "qemux86-64"
+
+# These are some of the more commonly used values. Looking at the files in the
+# meta/conf/machine directory, or the conf/machine directory of any additional layers
+# you add in will show all the available machines.
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# OE-Core defaults to ipkg, whilst Poky defaults to rpm:
+# PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686, x86_64, aarch64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "src-pkgs"       - add -src packages for all installed packages
+#                     (adds source code for debugging)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes-recipe/image.bbclass and
+# meta/classes-recipe/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+USER_CLASSES ?= "buildstats"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See meta/classes-recipe/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO:qemuall = "1"
+
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard halt
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necessary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS ??= "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    HALT,${TMPDIR},100M,1K \
+    HALT,${DL_DIR},100M,1K \
+    HALT,${SSTATE_DIR},100M,1K \
+    HALT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can be
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as https or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting some of the following lines. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# initially but it will then speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+# Note: For this to work you also need hash-equivalence passthrough to the matching server
+# There is a choice between our sstate server directly and a faster content delivery network
+# (CDN) kindly provided by JSDelivr, uncomment one of the SSTATE_MIRRORS lines, not both.
+# Using the CDN rather than the yoctoproject.org address is suggested/preferred.
+#
+#BB_HASHSERVE_UPSTREAM = 'wss://hashserv.yoctoproject.org/ws'
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/all/PATH;downloadfilename=PATH"
+
+#
+# Qemu configuration
+#
+# By default native qemu will build with a builtin VNC server where graphical output can be
+# seen. The line below enables the SDL UI frontend too.
+PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
+# By default libsdl2-native will be built, if you want to use your host's libSDL instead of 
+# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
+# a handy set of menus for controlling the emulator.
+#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+"
+
+#
+# Hash Equivalence
+#
+# Enable support for automatically running a local hash equivalence server and
+# instruct bitbake to use a hash equivalence aware signature generator. Hash
+# equivalence improves reuse of sstate by detecting when a given sstate
+# artifact can be reused as equivalent, even if the current task hash doesn't
+# match the one that generated the artifact.
+#
+# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
+#
+#BB_HASHSERVE = "auto"
+#BB_SIGNATURE_HANDLER = "OEEquivHash"
+
+#
+# Memory Resident Bitbake
+#
+# Bitbake's server component can stay in memory after the UI for the current command
+# has completed. This means subsequent commands can run faster since there is no need
+# for bitbake to reload cache files and so on. Number is in seconds, after which the
+# server will shut down.
+#
+#BB_SERVER_TIMEOUT = "60"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "2"

sources/poky/meta-poky/conf/templates/default/local.conf.sample.extended

@@ -0,0 +1,388 @@
+# BBMASK contains regular expressions that can be used to tell BitBake to ignore
+# certain recipes.
+#BBMASK = ""
+
+#
+# Parallelism Options
+#
+# These two options control how much parallelism BitBake should use. The first
+# option determines how many tasks bitbake should run in parallel:
+#
+#BB_NUMBER_THREADS ?= "4"
+#
+# Default to setting automatically based on cpu count
+#BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
+#
+# The second option controls how many processes make should run in parallel when
+# running compile tasks:
+#
+#PARALLEL_MAKE ?= "-j 4"
+#
+# Default to setting automatically based on cpu count
+#PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
+#
+# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
+# be appropriate for example.
+#
+# Some users are behind firewalls or use servers where the number of parallel connections
+# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
+# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
+#
+#do_fetch[number_threads] = "4"
+#
+
+# If you want to get an image based on directfb without x11 alter
+# DISTRO_FEATURES:
+DISTRO_FEATURES:append = " directfb"
+DISTRO_FEATURES:remove = "x11"
+
+# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale
+# packages at build time using qemu-native. Disabling it (by setting it to 0)
+# will save some build time at the expense of breaking i18n on devices with
+# less than 128MB RAM.
+#ENABLE_BINARY_LOCALE_GENERATION = "1"
+
+# If GLIBC_SPLIT_LC_PACKAGES is set to a non-zero value, convert
+# glibc-binary-localedata-XX-YY to be a meta package depending on
+# glibc-binary-localedata-XX-YY-lc-address and so on. This enables
+# saving quite some space if someone doesn't need LC_COLLATE for
+# example.
+#GLIBC_SPLIT_LC_PACKAGES = "1"
+
+# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
+# wish to perform the time-consuming step of generating all LIBC locales.
+# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
+# appropriate value for IMAGE_LINGUAS.
+# WARNING: this may break localisation!
+# WARNING: some recipes expect certain localizations to be enabled, e.g.
+# bash-ptest: fr-fr, de-de
+# glib-2.0-ptest: tr-tr, lt-lt, ja-jp.euc-jp, fa-ir, ru-ru, de-de, hr-hr, el-gr, fr-fr, es-es, en-gb
+# if you remove some of these and enable ptest, you'll get QA warning like:
+# ERROR: glib-2.0-1_2.58.0-r0 do_package_qa: QA Issue: glib-2.0-ptest rdepends on locale-base-de-de, but it isn't a build dependency? [build-deps]
+#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
+#IMAGE_LINGUAS ?= "en-gb"
+
+# The following are used to control options related to debugging.
+#
+# Uncomment this to change the optimization to make debugging easer, at the
+# possible cost of performance.
+# DEBUG_BUILD = "1"
+#
+# Uncomment this to disable the stripping of the installed binaries
+# INHIBIT_PACKAGE_STRIP = "1"
+#
+# Uncomment this to disable the split of the debug information into -dbg files
+# INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+#
+# When splitting debug information, the following controls the results of the
+# file splitting.
+#
+#  .debug (default):
+#    When splitting the debug information will be placed into
+#    a .debug directory in the same dirname of the binary produced:
+#      /bin/foo -> /bin/.debug/foo
+#
+#  debug-file-directory:
+#    When splitting the debug information will be placed into
+#    a central debug-file-directory, /usr/lib/debug:
+#      /bin/foo -> /usr/lib/debug/bin/foo.debug
+#
+#    Any source code referenced in the debug symbols will be copied
+#    and made available within the /usr/src/debug directory
+#
+#PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
+# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
+
+# Uncomment these to build a package such that you can use gprof to profile it.
+# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
+#
+# PROFILE_OPTIMIZATION = "-pg"
+# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
+# LDFLAGS =+ "-pg"
+
+# TCMODE controls the characteristics of the generated packages/images by
+# telling poky which toolchain 'profile' to use.
+#
+# The default is "default" which uses the internal toolchain. With
+# additional layers, it is possible to set this to use a precompiled
+# external toolchain. One example is the Sourcery G++ Toolchain, support
+# for which is now in the separate meta-sourcery layer:
+#
+#  http://github.com/MentorEmbedded/meta-sourcery/
+#
+# meta-sourcery can be used as a template for adding support for other
+# external toolchains. See the link above for further details.
+#
+# TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc,
+# so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc
+# you would set it as follows:
+#
+# TCMODE ?= "external-sourcery"
+
+# This value is currently used by pseudo to determine if the recipe should
+# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
+#
+# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but
+# it doesn't always guess properly.  If you have 32-bit executables on
+# your 64-bit build system, you likely want to set this to "0",
+# otherwise you could end up with incorrect file attributes on the
+# target filesystem.
+#
+# Default is to not build 32 bit libs on 64 bit systems, uncomment this
+# if you need the 32 bits libs
+#NO32LIBS = "0"
+
+# Uncomment the following lines to enable multilib builds
+#require conf/multilib.conf
+#MULTILIBS = "multilib:lib32"
+#DEFAULTTUNE:virtclass-multilib-lib32 = "x86"
+
+# Set RPM_PREFER_ELF_ARCH to configure preferred ABI when using rpm packaging
+# backend to generate a rootfs, choices are:
+# 1: ELF32 wins
+# 2: ELF64 wins
+# 4: ELF64 N32 wins (for mips64 or mips64el only)
+#RPM_PREFER_ELF_ARCH ?= "2"
+
+# The network based PR service host and port
+# Uncomment the following lines to enable PRservice.
+# Set PRSERV_HOST to 'localhost:0' to automatically
+# start local PRService.
+# Set to other values to use remote PRService.
+#PRSERV_HOST = "localhost:0"
+
+# Additional image generation features
+#
+# The following is a list of classes to import to use in the generation of images
+# currently an example class is image_types_uboot
+# IMAGE_CLASSES = " image_types_uboot"
+
+# The following options will build a companion 'debug filesystem' in addition
+# to the normal deployable filesystem.  This companion system allows a
+# debugger to know the symbols and related sources.  It can be used to
+# debug a remote 'production' system without having to add the debug symbols
+# and sources to remote system.  If IMAGE_FSTYPES_DEBUGFS is not defined, it
+# defaults to IMAGE_FSTYPES.
+#IMAGE_GEN_DEBUGFS = "1"
+#IMAGE_FSTYPES_DEBUGFS = "tar.gz"
+
+# Incremental rpm image generation, the rootfs would be totally removed
+# and re-created in the second generation by default, but with
+# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will
+# do update(remove/add some pkgs) on it.  NOTE: This is not suggested
+# when you want to create a productive rootfs
+#INC_RPM_IMAGE_GEN = "1"
+
+# This is a list of packages that require a commercial license to ship
+# product. If shipped as part of an image these packages may have
+# implications so they are disabled by default.  To enable them,
+# un-comment the below as appropriate.
+#LICENSE_FLAGS_ACCEPTED = "commercial_gst-fluendo-mp3 \
+#                           commercial_gst-openmax \
+#                           commercial_gst-plugins-ugly \
+#                           commercial_lame \
+#                           commercial_libmad \
+#                           commercial_libomxil \
+#                           commercial_mpeg2dec \
+#                           commercial_qmmp"
+
+
+#
+# Disk space monitor, take action when the disk space or the amount of
+# inode is running low, it is enabled when BB_DISKMON_DIRS is set.
+#
+# Set the directory for the monitor, the format is:
+# "action,directory,minimum_space,minimum_free_inode"
+#
+# The "action" must be set and should be one of:
+# HALT: Immediately halt
+# STOPTASKS: The new tasks can't be executed any more, will stop the build
+#           when the running tasks have been done.
+# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
+#
+# The "directory" must be set, any directory is OK.
+#
+# Either "minimum_space" or "minimum_free_inode" (or both of them)
+# should be set, otherwise the monitor would not be enabled,
+# the unit can be G, M, K or none, but do NOT use GB, MB or KB
+# (B is not needed).
+#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
+#
+# Set disk space and inode interval (only works when the action is "WARN",
+# the unit can be G, M, or K, but do NOT use the GB, MB or KB
+# (B is not needed), the format is:
+# "disk_space_interval,disk_inode_interval", the default value is
+# "50M,5K" which means that it would warn when the free space is
+# lower than the minimum space(or inode), and would repeat the warning
+# when the disk space reduces 50M (or the amount of inode reduces 5k).
+#BB_DISKMON_WARNINTERVAL = "50M,5K"
+
+# Archive the source and put them to ${DEPLOY_DIR}/sources/.
+#
+#INHERIT += "archiver"
+#
+# The tarball for the patched source will be created by default, and you
+# can configure the archiver as follow:
+#
+# Create archive for:
+# 1) original (or unpacked) source:
+#ARCHIVER_MODE[src] = "original"
+# 2) patched source: (default)
+#ARCHIVER_MODE[src] = "patched"
+# 3) configured source:
+#ARCHIVER_MODE[src] = "configured"
+#
+# 4) the patches between do_unpack and do_patch:
+#ARCHIVER_MODE[diff] = "1"
+# set the files that you'd like to exclude from the diff:
+#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
+#
+# 5) the environment data, similar to 'bitbake -e recipe':
+#ARCHIVER_MODE[dumpdata] = "1"
+#
+# 6) the recipe (.bb and .inc):
+#ARCHIVER_MODE[recipe] = "1"
+#
+# 7) Whether output the .src.rpm package:
+#ARCHIVER_MODE[srpm] = "1"
+#
+# 8) Filter the license, the recipe whose license in
+#    COPYLEFT_LICENSE_INCLUDE will be included, and in
+#    COPYLEFT_LICENSE_EXCLUDE will be excluded.
+#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
+#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
+#
+# 9) Config the recipe type that will be archived, the type can be
+#    target, native, nativesdk, cross, crosssdk and cross-canadian,
+#    you can set one or more types. Archive all types by default.
+#COPYLEFT_RECIPE_TYPES = 'target'
+#
+
+#
+# GCC/LD FLAGS to enable more secure code generation
+#
+# By including the security_flags include file you enable flags
+# to the compiler and linker that cause them to generate more secure
+# code.
+# This does affect compile speed slightly.
+#
+# Use the following line to enable the security compiler and linker flags to your build
+#require conf/distro/include/security_flags.inc
+
+# Image level user/group configuration.
+# Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
+#IMAGE_CLASSES += "extrausers"
+# User / group settings
+# The settings are separated by the ; character.
+# Each setting is actually a command. The supported commands are useradd,
+# groupadd, userdel, groupdel, usermod and groupmod.
+#EXTRA_USERS_PARAMS = "\
+#    useradd -p '' tester; \
+#    groupadd developers; \
+#    userdel nobody; \
+#    groupdel video; \
+#    groupmod -g 1020 developers; \
+#    usermod -s /bin/sh tester; \
+#"
+
+# Various packages dynamically add users and groups to the system at package
+# install time.  For programs that do not care what the uid/gid is of the
+# resulting users/groups, the order of the install will determine the final
+# uid/gid.  This can lead to non-deterministic uid/gid values from one build
+# to another.  Use the following settings to specify that all user/group adds
+# should be created based on a static passwd/group file.
+#
+# Note, if you enable or disable the useradd-staticids in a configured system,
+# the TMPDIR may contain incorrect uid/gid values.  Clearing the TMPDIR
+# will correct this condition.
+#
+# By default the system looks in the BBPATH for files/passwd and files/group
+# the default can be overridden by specifying USERADD_UID/GID_TABLES.
+#
+#USERADDEXTENSION = "useradd-staticids"
+#USERADD_UID_TABLES = "files/passwd"
+#USERADD_GID_TABLES = "files/group"
+#
+# In order to prevent generating a system where a dynamicly assigned uid/gid
+# can exist, you should enable the following setting.  This will force the
+# system to error out if the user/group name is not defined in the
+# files/passwd or files/group (or specified replacements.)
+#USERADD_ERROR_DYNAMIC = "1"
+
+# Enabling FORTRAN
+# Note this is not officially supported and is just illustrated here to
+# show an example of how it can be done
+# You'll also need your fortran recipe to depend on libgfortran
+#FORTRAN:forcevariable = ",fortran"
+
+#
+# Kernel image features
+#
+# The INITRAMFS_IMAGE image variable will cause an additional recipe to
+# be built as a dependency to the what ever rootfs recipe you might be
+# using such as core-image-sato.  The initramfs might be needed for
+# the initial boot of the target system such as to load kernel
+# modules prior to mounting the root file system.
+#
+# INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
+# specified by the INITRAMFS_IMAGE will be run through an extra pass
+# through the kernel compilation in order to build a single binary
+# which contains both the kernel image and the initramfs.  The
+# combined binary will be deposited into the tmp/deploy directory.
+# NOTE: You can set INITRAMFS_IMAGE in an image recipe, but
+#       INITRAMFS_IMAGE_BUNDLE can only be set in a conf file.
+#
+#INITRAMFS_IMAGE = "core-image-minimal-initramfs"
+#INITRAMFS_IMAGE_BUNDLE = "1"
+
+#
+# IPK Hierarchical feed
+#
+# In some cases it may be desirable not to have all package files in the same
+# directory. An example would be when package feeds are to be uploaded to a
+# shared webhosting service or transferred to a Windows machine which may have
+# problems with directories containing multiple thousands of files.
+#
+# If the IPK_HIERARCHICAL_FEED variable is set to "1", packages will be split
+# between subdirectories in a similar way to how Debian package feeds are
+# organised. In the hierarchical feed, package files are written to
+# <outdir>/<arch>/<pkg_prefix>/<pkg_subdir>, where pkg_prefix is the first
+# letter of the package file name for non-lib packages or "lib" plus the 4th
+# letter of the package file name for lib packages (eg, 'l' for less, 'libc' for
+# libc6).  pkg_subdir is the root of the package file name, discarding the
+# version and architecture parts and the common suffixes '-dbg', '-dev', '-doc',
+# '-staticdev', '-locale' and '-locale-*' which are listed in
+# meta/conf/bitbake.conf.
+#
+# If IPK_HIERARCHICAL_FEED is unset or set to any other value, the traditional
+# feed layout is used where package files are placed in <outdir>/<arch>/.
+#
+#IPK_HIERARCHICAL_FEED = "1"
+#
+
+#
+# System initialization
+#
+#INIT_MANAGER = "none"
+#INIT_MANAGER = "sysvinit"
+#INIT_MANAGER = "systemd"
+#INIT_MANAGER = "mdev-busybox"
+
+#
+# Use a full set of packages instead of busybox for base utils
+#
+#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
+#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
+#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
+#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"
+
+#
+# Enable LTO system-wide
+#
+#require conf/distro/include/lto.inc
+#DISTRO_FEATURES:append = " lto"
+
+#
+# Set PS1 for SDK
+#
+#SDK_PS1 ?= "${SDK_NAME}${SDK_VENDOR}:\$ "

sources/poky/meta-poky/conf/templates/default/site.conf.sample

@@ -0,0 +1,33 @@
+#
+# local.conf covers user settings, site.conf covers site specific information
+# such as proxy server addresses and optionally any shared download location
+#
+# SITE_CONF_VERSION is increased each time build/conf/site.conf
+# changes incompatibly
+SCONF_VERSION = "1"
+
+# Uncomment to cause CVS to use the proxy host specified
+#CVS_PROXY_HOST = "proxy.example.com"
+#CVS_PROXY_PORT = "81"
+
+# For svn, you need to create ~/.subversion/servers containing:
+#[global]
+#http-proxy-host = proxy.example.com
+#http-proxy-port = 81
+#
+
+# To use git with a proxy, you must use an external git proxy command, such as
+# the one provided by scripts/oe-git-proxy. To use this script, copy it to
+# your PATH and uncomment the following:
+#GIT_PROXY_COMMAND ?= "oe-git-proxy"
+#ALL_PROXY ?= "socks://socks.example.com:1080"
+#or
+#ALL_PROXY ?= "https://proxy.example.com:8080"
+# If you wish to use certain hosts without the proxy, specify them in NO_PROXY.
+# See the script for details on syntax. The script oe-git-proxy uses some tools
+# that may not be included on HOSTTOOLS, thus  add them manually through
+# HOSTTOOLS += "getent"
+
+# Uncomment this to use a shared download directory
+#DL_DIR = "/some/shared/download/directory/"
+