16accb6b24
- 264 license table entries with exact download URLs (224/264 resolved) - Complete sources/ directory with all BitBake recipes - Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl) - Full traceability for Softwarefreigabeantrag - GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4 - License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)
92 lines
3.1 KiB
Plaintext
92 lines
3.1 KiB
Plaintext
#@TYPE: Machine
|
|
#@NAME: i.MX 8QM MEK
|
|
#@SOC: i.MX8QM
|
|
#@DESCRIPTION: i.MX 8QuadMax Multisensory Enablement Kit board, rev B0
|
|
#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
|
|
|
|
MACHINEOVERRIDES =. "mx8:mx8qm:"
|
|
|
|
require conf/machine/include/imx-base.inc
|
|
require conf/machine/include/arm/armv8a/tune-cortexa72-cortexa53.inc
|
|
|
|
IMX_DEFAULT_BSP = "nxp"
|
|
|
|
MACHINE_FEATURES += "pci optee bcm43455 bcm4356 nxp8997-pcie nxp9098-pcie"
|
|
MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
|
|
|
|
# Don't include kernels in standard images
|
|
RRECOMMENDS:${KERNEL_PACKAGE_NAME}-base = ""
|
|
|
|
LOADADDR = ""
|
|
|
|
# We have to disable SERIAL_CONSOLE due to auto-serial-console
|
|
SERIAL_CONSOLES = "115200;ttyLP0"
|
|
|
|
# we do not want to have getty running on tty1 as we run
|
|
# auto-serial-console there
|
|
USE_VT = "0"
|
|
|
|
KERNEL_DEVICETREE = " \
|
|
freescale/imx8qm-mek.dtb \
|
|
freescale/imx8qm-mek-ca53.dtb \
|
|
freescale/imx8qm-mek-ca72.dtb \
|
|
freescale/imx8qm-mek-dsi-rm67191.dtb \
|
|
freescale/imx8qm-mek-dsi-rm67199.dtb \
|
|
freescale/imx8qm-mek-dsi-serdes.dtb \
|
|
freescale/imx8qm-mek-dsi-serdes-dual-display.dtb \
|
|
freescale/imx8qm-mek-dsi-serdes-dual-display-rpmsg.dtb \
|
|
freescale/imx8qm-mek-dsi-serdes-rpmsg.dtb \
|
|
freescale/imx8qm-mek-enet2-tja1100.dtb \
|
|
freescale/imx8qm-mek-hdmi.dtb \
|
|
freescale/imx8qm-mek-hdmi-rx.dtb \
|
|
freescale/imx8qm-mek-hdmi-rx-ov5640.dtb \
|
|
freescale/imx8qm-mek-jdi-wuxga-lvds1-panel.dtb \
|
|
freescale/imx8qm-mek-jdi-wuxga-lvds1-panel-rpmsg.dtb \
|
|
freescale/imx8qm-mek-ov5640.dtb \
|
|
freescale/imx8qm-mek-pcie-ep.dtb \
|
|
freescale/imx8qm-mek-rpmsg.dtb \
|
|
freescale/imx8qm-mek-sof.dtb \
|
|
freescale/imx8qm-mek-sof-cs42888.dtb \
|
|
freescale/imx8qm-mek-sof-wm8960.dtb \
|
|
freescale/imx8qm-mek-usd-wifi.dtb \
|
|
freescale/imx8qm-mek-usdhc3-m2.dtb \
|
|
"
|
|
|
|
UBOOT_MAKE_TARGET = \
|
|
"${@bb.utils.contains('MACHINE_FEATURES', 'optee', '', \
|
|
'u-boot.bin', d)}"
|
|
SPL_BINARY = \
|
|
"${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
|
|
'', d)}"
|
|
IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
|
|
IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
|
|
|
|
UBOOT_SUFFIX = "bin"
|
|
|
|
UBOOT_CONFIG ??= "sd"
|
|
UBOOT_CONFIG[sd] = "imx8qm_mek_defconfig,sdcard"
|
|
UBOOT_CONFIG[fspi] = "imx8qm_mek_fspi_defconfig"
|
|
|
|
IMX_BOOT_SEEK = "32"
|
|
|
|
IMAGE_BOOT_FILES += "hdmitxfw.bin hdmirxfw.bin dpfw.bin"
|
|
|
|
# Set ATF platform name
|
|
ATF_PLATFORM = "imx8qm"
|
|
|
|
IMXBOOT_TARGETS_SD = \
|
|
"${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \
|
|
'flash flash_ca72', d)}"
|
|
IMXBOOT_TARGETS_FSPI = \
|
|
"${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \
|
|
'flash_flexspi', d)}"
|
|
IMXBOOT_TARGETS = \
|
|
"${@bb.utils.contains('UBOOT_CONFIG', 'sd', '${IMXBOOT_TARGETS_SD}', \
|
|
'${IMXBOOT_TARGETS_FSPI}', d)}"
|
|
IMX_BOOT_SOC_TARGET = "iMX8QM"
|
|
|
|
BOARD_TYPE = "mek"
|
|
|
|
# Add additional firmware
|
|
MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
|