16accb6b24
- 264 license table entries with exact download URLs (224/264 resolved) - Complete sources/ directory with all BitBake recipes - Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl) - Full traceability for Softwarefreigabeantrag - GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4 - License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)
76 lines
2.8 KiB
HTML
76 lines
2.8 KiB
HTML
MACHINEOVERRIDES =. "mx8mm:"
|
|
|
|
require conf/machine/include/imx-base.inc
|
|
require conf/machine/include/arm/armv8a/tune-cortexa53.inc
|
|
|
|
# Mainline BSP defaults to "generic" cortexa53 configuration,
|
|
# adjust it here to include crypto extension which enables
|
|
# inline NEON and FPU code generation
|
|
DEFAULTTUNE:use-mainline-bsp = "cortexa53-crypto"
|
|
|
|
MACHINE_FEATURES += "pci wifi bluetooth bcm43455 bcm4356 nxp8987-sdio"
|
|
|
|
# NXP BSP can consume proprietary jailhouse and BCM4359 firmware
|
|
# Since the firmware is not available publicly, and rather distributed
|
|
# under "Proprietary" license - we opt-out from using it in all BSPs
|
|
# and pin it to NXP BSP only
|
|
# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
|
|
# a full support for it yet.
|
|
MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
|
|
|
|
KERNEL_DEVICETREE = " \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
|
|
"
|
|
KERNEL_DEVICETREE:append:use-nxp-bsp = " \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191-cmd-ram.dtb \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67199.dtb \
|
|
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67199-cmd-ram.dtb \
|
|
"
|
|
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
|
|
|
|
UBOOT_SUFFIX = "bin"
|
|
|
|
UBOOT_CONFIG ??= "sd"
|
|
UBOOT_CONFIG[sd] = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
|
|
|
|
SPL_BINARY = "spl/u-boot-spl.bin"
|
|
|
|
ATF_PLATFORM = "imx8mm"
|
|
|
|
IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', '${IMXBOOT_TARGETS_BASENAME}', d)}"
|
|
|
|
IMX_BOOT_SOC_TARGET = "iMX8MM"
|
|
|
|
SERIAL_CONSOLES = "115200;ttymxc1"
|
|
|
|
# Add support for Syslinux to mainline BSP.
|
|
# U-Boot has the Distro Boot mode enabled by default, which
|
|
# require that either Syslinux to be enabled, or a boot script
|
|
# to be used to define the boot process.
|
|
# We opt-in for Syslinux, since it is designated as a preferred
|
|
# distro boot mode according to the U-Boot documentation.
|
|
UBOOT_EXTLINUX:use-mainline-bsp = "1"
|
|
UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
|
|
UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Mini EVK"
|
|
|
|
UBOOT_EXTLINUX_MENU_DESCRIPTION:default:use-mainline-bsp = "i.MX8M Mini EVK"
|
|
UBOOT_EXTLINUX_FDT:default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
|
|
UBOOT_EXTLINUX_CONSOLE:default:use-mainline-bsp = "console=${console}"
|
|
UBOOT_EXTLINUX_ROOT:default:use-mainline-bsp = "root=/dev/mmcblk1p2"
|
|
|
|
# Add extlinux.conf to the lis of files, which are deployed onto the
|
|
# boot partition
|
|
IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
|
|
|
|
LOADADDR = ""
|
|
UBOOT_MAKE_TARGET = "all"
|
|
IMX_BOOT_SEEK = "33"
|
|
|
|
OPTEE_BIN_EXT = "8mm"
|
|
TEE_LOAD_ADDR = "0xbe000000"
|
|
|
|
# Add additional firmware
|
|
MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
|