openclaw/adsp219x-re
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2a8a952f22fde354c6c521c7cb63f030ad7bd60b
adsp219x-re/docs/9x_opcodes.txt

2178 lines
60 KiB
Plaintext
Raw Normal View History

Initial commit: ADSP-219x disassembler, docs, test ROMs, analysis tools - Standalone Python disassembler for 24-bit ADSP-219x instructions - Complete instruction set reference (PDFs + extracted text) - Architecture documentation and getting-started guide - Test ROM generator with packed (3-byte) and padded (4-byte) formats - r2pipe-based analysis script for radare2 integration
2026-04-12 13:05:38 +00:00
9 INSTRUCTION OPCODES
Figure 9-0.
Table 9-0.
Listing 9-0.
This chapter lists and describes the opcodes that defines each of the
instructions in the ADSP-219x’s instruction set. This information is use-
ful for debugging programs.
This chapter covers the following topics:
• “Opcode Mnemonics” on page 9-1
• “Opcode Definitions” on page 9-20
Opcode Mnemonics
This section lists, describes, and gives the numeric value for each opcode
mnemonic.
Table 9-1. Opcode mnemonics
Mnemonic Description Details
AMF Specifies an ALU or multiplier operation. page 9-8
AS Specifies whether ALU saturation mode is page 9-40
0 = disabled
1 = enabled
B Specifies whether branch is page 9-32
page 9-41
0 = immediate
page 9-42
1 = delayed
ADSP-219x Instruction Set Reference 9-1
Instruction Opcodes
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
BIT Specifies which interrupt to enable or disable (0–15). page 9-60
BO Specifies whether the supplied 4-bit constant in a type 9 instruction is page 9-12
page 9-27
01 = as is
11 = negated
BR Specifies whether bit-reverse addressing on DAG1 is page 9-40
0 = disabled
1 = enabled
BSR Specifies whether the secondary DAG address registers are page 9-40
0 = disabled
1 = enabled
C Specifies whether a software interrupt is page 9-60
0 = set
1 = cleared
CC Specifies the two LSBs of a 4-bit constant value in a type 9 instruction. page 9-12
page 9-27
CF Specifies whether to flush the instruction cache page 9-50
0 = No flush
1 = flush
COND Specifies one of the condition codes on which to base execution of the page 9-11
instruction.
9-2 ADSP-219x Instruction Set Reference
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
D Specifies the direction of a data move. page 9-22
page 9-35
0 = read
page 9-51
1 = write page 9-54
page 9-57
page 9-58
DD Specifies a destination data register for a DM bus transfer. page 9-21
00 = AX0
01 = AX1
10 = MX0
11 = MX1
DDREG Specifies a destination register for a register-to-register move operation. page 9-13
DREG Specifies an unrestricted data register (REG0 only). page 9-13
DMI Specifies a DAG index address register (I0–I3) for a DM bus transfer. page 9-18
page 9-21
DMM Specifies a DAG modify address register (M0–M3) for a DM bus trans- page 9-18
fer. page 9-21
DRGP Specifies a destination register group. page 9-39
00 = REG0
01 = REG1
10 = REG2
11 = REG3
DRL Specifies two MSBs of DREG data register address. page 9-13
DRU Specifies two LSBs of DREG data register address. page 9-13
Exponent Specifies an 8-bit, two’s-complement shift value. page 9-37
ADSP-219x Instruction Set Reference 9-3
Instruction Opcodes
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
G Specifies a DAG register group. page 9-17
0 = DAG1
1 = DAG2
IREG/MREG Specifies DAG index and modify registers (I0–I7, M0–M7). page 9-18
I Specifies DAG index register (I0–I7). page 9-17
Idle Value Specifies a 4-bit value that defines an internal clock divisor. page 9-53
INT Specifies whether interrupts are globally page 9-40
0 = disabled
1 = enabled
LPP Specifies push/pop of the loop stacks. page 9-50
0 = disabled
1 = enabled
M Specifies a DAG modify register. page 9-17
MM Specifies whether MAC integer mode is page 9-40
0 = disabled
1 = enabled
MOD DATA Specifies an 8-bit, two’s-complement immediate data value. page 9-44
page 9-51
MS Specifies memory bus for a memory data transfer page 9-54
0 = 16-bit DM bus
1 = 24-bit PM bus
9-4 ADSP-219x Instruction Set Reference
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
OL Specifies whether ALU overflow mode is page 9-40
0 = disabled
1 = enabled
PD Specifies a destination data register for a PM bus transfer. page 9-21
00 = AY0
01 = AY1
10 = MY0
11 = MY1
PMI Specifies a DAG index address register (I4–I7) for a PM bus transfer. page 9-18
PMM Specifies a DAG modify address register (M4–M7) for a PM bus trans- page 9-18
fer.
PPP Specifies push/pop of the PC stack. page 9-50
0 = disabled
1 = enabled
Q Specifies the RTI mode. page 9-42
0 = normal
1 = single-step
R Specifies a result register. page 9-49
0 = MR register
1 = SR register
REG Specifies a core register of RGPx. page 9-13
REG1 Specifies a register group 1 register page 9-13
page 9-25
ADSP-219x Instruction Set Reference 9-5
Instruction Opcodes
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
REG2 Specifies a register group 2 register page 9-13
page 9-25
REG3 Specifies a register group 3 register page 9-13
page 9-56
RGP Specifies a register group. page 9-13
00 = REG0
01 = REG1
10 = REG2
11 = REG3.
S Specifies the branch type. page 9-32
page 9-41
0 = jump
1 = call
SDREG Specifies the source data register for a data move operation. page 9-13
SF Specifies a shift function. page 9-15
SPP Specifies push/pop of the status stack. page 9-50
0 = disabled
1 = enabled
SR Specifies whether the secondary data registers are page 9-40
0 = disabled
1 = enabled
9-6 ADSP-219x Instruction Set Reference
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
SRGP Specifies a source register group for a data move operation. page 9-39
00 = REG0
01 = REG1
10 = REG2
11 = REG3
SWCD Specifies a 4-bit nonfunctional value used by ADI tools only. page 9-52
T Specifies the return type. page 9-42
0 = RTS
1 = RTI
TERM Specifies the terminating condition for the type 11 instruction. page 9-34
1110 = NOT CE
1111 = TRUE
TI Specifies whether the timer is page 9-40
0 = disabled
1 = enabled
U Specifies whether the DAG index register is page 9-54
0 = premodified with no update
1 = postmodified with update
XOP Specifies a restricted data register used to supply the x operand value in page 9-19
a multifunction or conditional instruction.
XREG Specifies the source register (REG0) in a shift function. page 9-13
ADSP-219x Instruction Set Reference 9-7
Instruction Opcodes
Table 9-1. Opcode mnemonics (Cont’d)
Mnemonic Description Details
Y0 Specifies whether the source of the x-operand is page 9-11
0 = data register
1 = 0 (explicit value)
YOP Specifies a restricted data register used to supply the y operand value in page 9-19
a multifunction or conditional instruction.
YREG Specifies the destination register (REG0) in a shift function. page 9-13
page 9-11
YY Specifies the two MSBs of a 4-bit constant value in a type 9 instruc- page 9-12
tion. page 9-27
Z Specifies a result or feedback register page 9-23
page 9-26
0 = result register
page 9-27
1 = feedback register page 9-11
ALU or Multiplier Function (AMF) Codes
Table 9-2 on page 9-9 lists the AMF codes used by these instruction types:
• “Type 1: Compute | DregX«···DM | DregY«···PM” on page 9-21
• “Type 4: Compute | Dreg «···» DM/PM” on page 9-23
• “Type 8: Compute | Dreg1 «··· Dreg2” on page 9-26
• “Type 9: Compute” on page 9-27
9-8 ADSP-219x Instruction Set Reference
Table 9-2. ALU/multiplier function (AMF) codes
Code Function Description
Multiplier functions
00000 NOP No operation
00001 X * Y (RND) Multiply
00010 MR + X * Y (RND) Multiply and accumulate
00011 MR – X * Y (RND) Multiply and subtract
00100 X * Y (SS) Multiply
00101 X * Y (SU) Multiply
00110 X * Y (US) Multiply
00111 X * Y (UU) Multiply
01000 MR + X * Y (SS) Multiply and accumulate
01001 MR + X * Y (SU) Multiply and accumulate
01010 MR + X * Y (US) Multiply and accumulate
01011 MR + X * Y (UU) Multiply and accumulate
01100 MR – X * Y (SS) Multiply and subtract
01101 MR – X * Y (SU) Multiply and subtract
01110 MR – X * Y (US) Multiply and subtract
01111 MR – X * Y (UU) Multiply and subtract
(RND) = round results; (SS) = both operands signed; (SU) = x operand signed, y operand unsigned;
(US) =x operand unsigned, y operand signed; (UU) = both operands unsigned
ADSP-219x Instruction Set Reference 9-9
Instruction Opcodes
Table 9-2. ALU/multiplier function (AMF) codes (Cont’d)
Code Function Description
ALU functions
10000 Y PASS/CLEAR
10001 Y+1 PASS
10010 X+Y+C Add with carry
10011 X+Y Add
10100 NOT Y Negate
10101 –Y PASS
10110 X–Y+C–1 Subtract (X–Y) with borrow
10111 X–Y Subtract
11000 Y–1 PASS
11001 Y–X Subtract
11010 Y–X+C–1 Subtract (Y–X) with borrow
11011 NOT X Negate
11100 X AND Y AND/test bit,clear bit
11101 X OR Y OR/set bit
11110 X XOR Y XOR/toggle bit
11111 ABS X Absolute value
(RND) = round results; (SS) = both operands signed; (SU) = x operand signed, y operand unsigned;
(US) =x operand unsigned, y operand signed; (UU) = both operands unsigned
9-10 ADSP-219x Instruction Set Reference
Condition Codes
Table 9-3 on page 9-11 lists the condition codes used by these instruction
types:
• “Type 9: Compute” on page 9-27
• “Type 10: Direct Jump” on page 9-32
• “Type 16: Shift Reg0” on page 9-38
• “Type 19: Indirect Jump/Call” on page 9-41
• “Type 20: Return” on page 9-42
• “Type 36: Long Jump/Call” on page 9-59
• “Type 11: Do ··· Until” on page 9-34
uses NOT CE and TRUE only for the terminating condition.
Table 9-3. Condition codes
Code Condition Description
0000 EQ Equal to 0 (= 0)
0001 NE Not equal to 0 (≠ 0)
0010 GT Greater than 0 (>0)
0011 LE Less than or equal to 0 (≤0)
0100 LT Less than 0 (<0)
0101 GE Greater than or equal to 0 (≥0)
0110 AV ALU overflow
0111 NOT AV Not ALU overflow
ADSP-219x Instruction Set Reference 9-11
Instruction Opcodes
Table 9-3. Condition codes (Cont’d)
Code Condition Description
1000 AC ALU carry
1001 NOT AC Not ALU carry
1010 SWCOND CCODE register condition
1011 NOT SWCOND Not CCODE register condition
1100 MV MAC overflow
1101 NOT MV Not MAC overflow
1110 NOT CE Counter not expired
1111 TRUE Always true
Constant Codes
Table 9-4 lists the valid constants used by “Type 9: Compute” on
page 9-27. As shown, the YY/CC bits determine the constant value and the
BO bits determine the sign of the value.
Table 9-4. Constants
Code Decimal / Hex Decimal / Hex
YY CC BO = 01 BO = 11
00 00 1 / 0x0001 −2 / 0xFFFE
00 01 2 / 0x0002 −3 / 0xFFFD
00 10 4 / 0x0004 −5 / 0xFFFB
00 11 8 / 0x0008 −9 / 0xFFF7
9-12 ADSP-219x Instruction Set Reference
Table 9-4. Constants (Cont’d)
Code Decimal / Hex Decimal / Hex
YY CC BO = 01 BO = 11
01 00 16 / 0x0010 −17 / 0xFFEF
01 01 32 / 0x0020 −33 / 0xFFDF
01 10 64 / 0x0040 −65 / 0xFFBF
01 11 128 / 0x0080 −129 / 0xFF7F
10 00 256 / 0x0100 −257 / 0xFEFF
10 01 512 / 0x0200 −513 / 0xFDFF
10 10 1024 / 0x0400 −1025 / 0xFBFF
10 11 2048 / 0x0800 −2049 / 0xF7FF
11 00 4096 / 0x1000 −4097 / 0xEFFF
11 01 8192 / 0x2000 −8193 / 0xDFFF
11 10 16384 / 0x4000 −16385 / 0xBFFF
11 11 −32768 / 0x8000 +32767 / 0x7FFF
Core Register Codes
Table 9-5 on page 9-14 list the core registers and their addresses. The
complete address of any individual register is formed by appending the
register’s address bits to its RGP bits, so, for example, the address of the I2
register is 010010. The opcode mnemonics DREG, DDREG, SDREG, XREG, and
YREG and the following instruction types reference these registers by their
address bits:
• “Type 3: Dreg/Ireg/Mreg «···» DM/PM” on page 9-22
ADSP-219x Instruction Set Reference 9-13
Instruction Opcodes
• “Type 4: Compute | Dreg «···» DM/PM” on page 9-23
• “Type 6: Dreg «··· Data16” on page 9-24
• “Type 8: Compute | Dreg1 «··· Dreg2” on page 9-26
• “Type 9: Compute” on page 9-27
• “Type 12: Shift | Dreg «···» DM/PM” on page 9-35
• “Type 14: Shift | Dreg1 «··· Dreg2” on page 9-36
• “Type 15: Shift Data8” on page 9-37
• “Type 16: Shift Reg0” on page 9-38
• “Type 17: Any Reg «··· Any Reg” on page 9-39
• “Type 34: Dreg «···» IOreg” on page 9-57
• “Type 35: Dreg «···»Sreg” on page 9-58
Table 9-5. Core registers
RGP/Address Register Groups (RGP)
Address 00 (REG0) 01 (REG1) 10 (REG2) 11 (REG3)
0000 AX0 I0 I4 ASTAT
0001 AX1 I1 I5 MSTAT
0010 MX0 I2 I6 SSTAT
0011 MX1 I3 I7 LPSTACKP
0100 AY0 M0 M4 CCODE
0101 AY1 M1 M5 SE
0110 MY0 M2 M6 SB
9-14 ADSP-219x Instruction Set Reference
Table 9-5. Core registers (Cont’d)
RGP/Address Register Groups (RGP)
Address 00 (REG0) 01 (REG1) 10 (REG2) 11 (REG3)
0111 MY1 M3 M7 PX
1000 MR2 L0 L4 DMPG1
1001 SR2 L1 L5 DMPG2
1010 AR L2 L6 IOPG
1011 SI L3 L7 IJPG
1100 MR1 IMASK Reserved Reserved
1101 SR1 IRPTL Reserved Reserved
1110 MR0 ICNTL CNTR Reserved
1111 SR0 STACKA LPSTACKA STACKP
SF Function Codes
Table 9-6 list the shift function (SF) codes used by these instruction types:
• “Type 12: Shift | Dreg «···» DM/PM” on page 9-35
• “Type 14: Shift | Dreg1 «··· Dreg2” on page 9-36
• “Type 15: Shift Data8” on page 9-37
—shift functions (codes 0000–0111) only
• “Type 16: Shift Reg0” on page 9-38
ADSP-219x Instruction Set Reference 9-15
Instruction Opcodes
Table 9-6. SF codes
Code Function
0000 LSHIFT (HI)
0001 LSHIFT (HI, OR)
0010 LSHIFT (LO)
0011 LSHIFT (LO, OR)
0100 ASHIFT (HI)
0101 ASHIFT (HI, OR)
0110 ASHIFT (LO)
0111 ASHIFT (LO, OR)
1000 NORM (HI)
1001 NORM (HI, OR)
1010 NORM (LO)
1011 NORM (LO, OR)
1100 EXP (HI)
1101 EXP (HIX)
1110 EXP (LO)
1111 Derive Block Exponent
9-16 ADSP-219x Instruction Set Reference
I and M Codes
Table 9-7 on page 9-17 lists the DAG index and modify register codes
used by the following instruction types. The G bit (DAG1/DAG2) determines
which group of I (index) and M (modify) registers.
• “Type 4: Compute | Dreg «···» DM/PM” on page 9-23.
• “Type 12: Shift | Dreg «···» DM/PM” on page 9-35
• “Type 19: Indirect Jump/Call” on page 9-41
• “Type 21: Modify DagI” on page 9-43
• “Type 21a: Modify DagI” on page 9-44
• “Type 22: DM/PM «··· Data16” on page 9-45
• “Type 29: Dreg «···» DM” on page 9-51
• “Type 32: Any Reg «···» PM/DM” on page 9-54
Table 9-7. I and M codes
DAG1 (G=0) DAG2 (G=1)
Code I M I M
00 I0 M0 I4 M4
01 I1 M1 I5 M5
10 I2 M2 I6 M6
11 I3 M3 I7 M7
ADSP-219x Instruction Set Reference 9-17
Instruction Opcodes
DMI, DMM, PMI, and PMM Codes
Table 9-8 lists the DAG index and modify register codes used by “Type 1:
Compute | DregX«···DM | DregY«···PM” on page 9-21.
Table 9-8. DMI, DMM, PMI, PMM codes
Code DMI DMM PMI PMM
00 I0 M0 I4 M4
01 I1 M1 I5 M5
10 I2 M2 I6 M6
11 I3 M3 I7 M7
IREG/MREG Codes
Table 9-9 lists the Ireg and Mreg codes used by “Type 3: Dreg/Ireg/Mreg
«···» DM/PM” on page 9-22 to specify a DAG index or modify register.
Table 9-9. Ireg, Mreg codes
Code Register Code Register
0000 I0 1000 M0
0001 I1 1001 M1
0010 I2 1010 M2
0011 I3 1011 M3
0100 I4 1100 M4
0101 I5 1101 M5
9-18 ADSP-219x Instruction Set Reference
Table 9-9. Ireg, Mreg codes (Cont’d)
Code Register Code Register
0110 I6 1110 M6
0111 I7 1111 M7
XOP and YOP Codes
Table 9-10 on page 9-19 lists the XOP and YOP codes used by these
instructions:
• “Type 1: Compute | DregX«···DM | DregY«···PM” on page 9-21
• “Type 4: Compute | Dreg «···» DM/PM” on page 9-23
• “Type 8: Compute | Dreg1 «··· Dreg2” on page 9-26
• “Type 9: Compute” on page 9-27
• “Type 12: Shift | Dreg «···» DM/PM” on page 9-35
• “Type 23: Divide primitive, DIVQ” on page 9-47
• “Type 24: Divide primitive, DIVS” on page 9-48
Table 9-10. XOP/YOP codes
XOP YOP
Code ALU MAC Shift Code ALU MAC
000 AX0 MX0 SI 00 AY0 MY0
001 AX1 MX1 SR2 01 AY1 MY1
010 AR AR AR 10 AF SR1
ADSP-219x Instruction Set Reference 9-19
Instruction Opcodes
Table 9-10. XOP/YOP codes
XOP YOP
Code ALU MAC Shift Code ALU MAC
011 MR0 MR0 MR0 11 0 0
100 MR1 MR1 MR1
101 MR2 MR2 MR2
110 SR0 SR0 SR0
111 SR1 SR1 SR1
Opcode Definitions
For each instruction opcode, this section provides the following
information:
• Opcode bits
• Syntax
• See also (related instruction reference pages)
For mnemonics definitions, see “Opcode Mnemonics” on page 9-1.
9-20 ADSP-219x Instruction Set Reference
Type 1: Compute | DregX«···DM | DregY«···PM
Multifunction ALU/MAC with DM and PM dual read with DAG1 and
DAG2 postmodify
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
1 1 PD DD AMF YOP
10 9 8 7 6 5 4 3 2 1 0
XOP PMI PMM DMI DMM
or for NOP only:
23 22 21 20 19 18 17 16 15 14 13 12 11
1 1 PD DD 0 0 0 0 0
10 9 8 7 6 5 4 3 2 1 0
PMI PMM DMI DMM
SYNTAX
|<ALU>, <MAC>|, Xop = DM(Ia += Mb), Yop = PM(Ic += Md);
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Compute with Dual Memory Read” on page 6-3
• “Dual Memory Read” on page 6-7
ADSP-219x Instruction Set Reference 9-21
Instruction Opcodes
Type 3: Dreg/Ireg/Mreg «···» DM/PM
Register read/write to immediate 16-bit address
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
1 0 1 D 16-bit address
10 9 8 7 6 5 4 3 2 1 0
16-bit address IREG/MREG
or:
23 22 21 20 19 18 17 16 15 14 13 12 11
1 0 0 D 16-bit address
10 9 8 7 6 5 4 3 2 1 0
16-bit address DREG
SYNTAX
|DM(<Addr16>| = |Dreg, Ireg, Mreg|;
|Dreg, Ireg, Mreg| = |DM(<Addr16>)|;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Direct Memory Read/Write—Immediate Address” on page 7-24
9-22 ADSP-219x Instruction Set Reference
Type 4: Compute | Dreg «···» DM/PM
Multifunction ALU/MAC with memory read or write using DAG
postmodify
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 1 1 G D Z AMF YOP
10 9 8 7 6 5 4 3 2 1 0
XOP DREG I M
SYNTAX
|<ALU>, <MAC> |, Dreg = |DM(Ia += Mb), PM(Ic += Md)|;
|<ALU>, <MAC> |, |DM(Ia += Mb), PM(Ic += Md)| = Dreg;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Compute with Memory Read” on page 6-10
• “Compute with Memory Write” on page 6-14
ADSP-219x Instruction Set Reference 9-23
Instruction Opcodes
Type 6: Dreg «··· Data16
Immediate register group 0 (Dreg) register load
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 1 0 0 16-bit data
10 9 8 7 6 5 4 3 2 1 0
16-bit data DREG
SYNTAX
<Dreg> = <Data16>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Direct Register Load” on page 7-27
9-24 ADSP-219x Instruction Set Reference
Type 7: Reg1/2 «··· Data16
Immediate register group 1 or 2 (Ireg, Mreg, Lreg, IMASK, IRPTL, ICNTL,
CNTR, STACKA, LPCSTACKA) register load
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 1 0 1 16-bit data
10 9 8 7 6 5 4 3 2 1 0
16-bit data REG1
or:
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 1 16-bit data
10 9 8 7 6 5 4 3 2 1 0
16-bit data REG2
SYNTAX
| <Reg1>, <Reg2> | = <Data16>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Direct Register Load” on page 7-27
ADSP-219x Instruction Set Reference 9-25
Instruction Opcodes
Type 8: Compute | Dreg1 «··· Dreg2
ALU/MAC with data register move
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 1 Z AMF YOP
10 9 8 7 6 5 4 3 2 1 0
XOP DDREG SDREG
or, generate ALU/MAC status only
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 1 Z AMF YOP
10 9 8 7 6 5 4 3 2 1 0
XOP 1 0 1 0 1 0 1 0
SYNTAX
| <ALU>, <MAC> |, Dreg = Dreg;
NONE = ALU (Xop, Yop);
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Compute with Register to Register Move” on page 6-18
• “Generate ALU Status Only: NONE” on page 3-44
9-26 ADSP-219x Instruction Set Reference
Type 9: Compute
Conditional ALU/MAC
OPCODE
Conditional ALU/MAC
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 0 Z AMF YOP
10 9 8 7 6 5 4 3 2 1 0
XOP 0 0 0 0 COND
Conditional ALU/MAC operations using constant YOP
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 0 Z AMF YY
10 9 8 7 6 5 4 3 2 1 0
XOP CC BO COND
Conditional ALU/MAC operations with YOP=0
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 0 Z AMF 1 1
10 9 8 7 6 5 4 3 2 1 0
XOP 0 0 0 0 COND
ADSP-219x Instruction Set Reference 9-27
Instruction Opcodes
Conditional MAC squaring operations only
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 1 0 0 Z AMF 0 0
10 9 8 7 6 5 4 3 2 1 0
XOP 0 0 0 1 COND
SYNTAX
[IF Cond] |AR, AF| = Xop + |Yop, Yop + C, C, Const, Const + C|;
[IF Cond] |AR, AF| = Xop − |Yop,Yop+C−1,+C−1,Const, Const+C−1|;
[IF Cond] |AR, AF| = Yop − |Xop, Xop+C−1|;
[IF Cond] |AR, AF| = − |Xop+C−1, Xop+Const, Xop+Const+C−1|;
[IF Cond] |AR, AF| = Xop |AND, OR, XOR| |Yop, Const|;
[IF Cond] |AR, AF| = PASS |Xop, Yop, Const|;
[IF Cond] |AR, AF| = NOT |Xop, Yop|;
[IF Cond] |AR, AF| = ABS Xop;
[IF Cond] |AR, AF| = Yop +1;
[IF Cond] |AR, AF| = Yop −1;
[IF Cond] |MR, SR| = Xop * Yop [(|RND, SS, SU, US, UU|)];
[IF Cond] |MR, SR| = Yop * Xop [(|RND, SS, SU, US, UU|)];
[IF Cond]|MR, SR| = |MR, SR| + Xop * Yop [(|RND,SS,SU,US,UU|)];
[IF Cond] |MR, SR| = |MR, SR| + Yop * Xop [(|RND,SS,SU,US,UU|)];
[IF Cond] |MR, SR| = |MR, SR| − Xop * Yop [(|RND,SS,SU,US,UU|)];
[IF Cond] |MR, SR| = |MR, SR| − Yop * Xop [(|RND,SS,SU,US,UU|)];
[IF Cond] |MR, SR| = 0;
[IF Cond] MR = MR [(RND)];
[IF Cond] SR = SR [(RND)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Add/Add with Carry” on page 3-5
• “Subtract X-Y/Subtract X-Y with Borrow” on page 3-8
• “Subtract Y-X/Subtract Y-X with Borrow” on page 3-12
9-28 ADSP-219x Instruction Set Reference
• “Bitwise Logic: AND, OR, XOR” on page 3-15
• “Bit Manipulation: TSTBIT, SETBIT, CLRBIT, TGLBIT” on
page 3-18
• “Clear: PASS” on page 3-20
• “Negate: NOT” on page 3-23
• “Absolute Value: ABS” on page 3-26
• “Increment” on page 3-29
• “Decrement” on page 3-32
• “Multiply” on page 4-8
• “Multiply with Cumulative Add” on page 4-11
• “Multiply with Cumulative Subtract” on page 4-14
• “MAC Clear” on page 4-17
• “MAC Round/Transfer” on page 4-19
ADSP-219x Instruction Set Reference 9-29
Instruction Opcodes
Type 9a: Compute
Unconditional ALU/MAC
OPCODE
Register file ALU/MAC
23 22 21 20 19 18 17 16 15 14 13 12
0 0 1 0 0 Z AMF Y0
11 10 9 8 7 6 5 4 3 2 1 0
XREG 1 0 YREG
Register file ALU/MAC with XREG=0
23 22 21 20 19 18 17 16 15 14 13 12
0 0 1 0 0 Z AMF Y0
11 10 9 8 7 6 5 4 3 2 1 0
1 0 YREG
SYNTAX
|AR, AF| = Dreg1 + |Dreg2, Dreg2 + C, C |;
|AR, AF| = Dreg1 − |Dreg2, Dreg2 + C −1, +C −1|;
|AR, AF| = Dreg2 − |Dreg1, Dreg1 + C −1|;
|AR, AF| = Dreg1 |AND, OR, XOR| Dreg2;
|AR, AF| = PASS |Dreg1, Dreg2, Const|;
|AR, AF| = PASS 0;
|AR, AF| = NOT |Dreg|;
|AR, AF| = ABS Dreg;
|AR, AF| = Dreg +1;
|AR, AF| = Dreg −1;
|MR, SR| = Dreg1 * Dreg2 [(|RND, SS, SU, US, UU|)];
|MR, SR| = |MR, SR| + Dreg1 * Dreg2 [(|RND, SS, SU, US, UU|)];
|MR, SR| = |MR, SR| − Dreg1 * Dreg2 [(|RND, SS, SU, US, UU|)];
9-30 ADSP-219x Instruction Set Reference
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Add/Add with Carry” on page 3-5
• “Subtract X-Y/Subtract X-Y with Borrow” on page 3-8
• “Subtract Y-X/Subtract Y-X with Borrow” on page 3-12
• “Bitwise Logic: AND, OR, XOR” on page 3-15
• “Clear: PASS” on page 3-20
• “Negate: NOT” on page 3-23
• “Absolute Value: ABS” on page 3-26
• “Increment” on page 3-29
• “Decrement” on page 3-32
• “Multiply” on page 4-8
• “Multiply with Cumulative Add” on page 4-11
• “Multiply with Cumulative Subtract” on page 4-14
ADSP-219x Instruction Set Reference 9-31
Instruction Opcodes
Type 10: Direct Jump
13-bit relative conditional/unconditional jump with delayed branch
option
OPCODE
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 1 0 B 13-bit address
10 9 8 7 6 5 4 3 2 1 0
13-bit address COND
SYNTAX
[IF Cond] JUMP <Reladdr13> [(DB)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Direct JUMP (PC relative)” on page 8-27
9-32 ADSP-219x Instruction Set Reference
Type 10a: Direct Jump/Call
16-bit relative conditional/unconditional jump with delayed branch
option
OPCODE
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 1 1 14-bit address
10 9 8 7 6 5 4 3 2 1 0
14-bit address B S 2MSBs
SYNTAX
CALL <Reladdr16> [(DB)];
JUMP <Reladdr16> [(DB)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “CALL (PC relative)” on page 8-30
• “JUMP (PC relative)” on page 8-34
ADSP-219x Instruction Set Reference 9-33
Instruction Opcodes
Type 11: Do ··· Until
12-bit relative conditional DO
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 0 1 1 0 12-bit address
10 9 8 7 6 5 4 3 2 1 0
12-bit address TERM
SYNTAX
DO <Reladdr12> UNTIL [CE, FOREVER];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “DO UNTIL (PC relative)” on page 8-22
9-34 ADSP-219x Instruction Set Reference
Type 12: Shift | Dreg «···» DM/PM
Shift with memory read/write using DAG postmodify
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 0 0 1 G SF D
10 9 8 7 6 5 4 3 2 1 0
XOP DREG I M
SYNTAX
<SHIFT> , Dreg = |DM(Ia += Mb), PM(Ic += Md)|;
<SHIFT> , |DM(Ia += Mb), PM(Ic += Md)| = Dreg;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Compute with Memory Read” on page 6-10
• “Compute with Memory Write” on page 6-14
• “XOP/YOP codes” on page 9-19
ADSP-219x Instruction Set Reference 9-35
Instruction Opcodes
Type 14: Shift | Dreg1 «··· Dreg2
Register file shift with data register move
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 1 0 1 0 0 SF
11 10 9 8 7 6 5 4 3 2 1 0
XREG DDREG SDREG
SYNTAX
<SHIFT>, Dreg = Dreg;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Compute with Register to Register Move” on page 6-18
9-36 ADSP-219x Instruction Set Reference
Type 15: Shift Data8
Immediate register file shift
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 1 1 1 SF
11 10 9 8 7 6 5 4 3 2 1 0
XREG Exponent
SYNTAX
SR = [SR OR] ASHIFT BY <Imm8> [(|HI, LO|)];
SR = [SR OR] LSHIFT BY <Imm8> [(|HI, LO|)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Arithmetic Shift Immediate” on page 5-8
• “Logical Shift Immediate” on page 5-12
ADSP-219x Instruction Set Reference 9-37
Instruction Opcodes
Type 16: Shift Reg0
Conditional register file shift
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 1 1 0 SF
11 10 9 8 7 6 5 4 3 2 1 0
XREG COND
SYNTAX
[IF Cond] SR = [SR OR] ASHIFT Dreg [(|HI, LO|)];
[IF Cond] SR = [SR OR] LSHIFT Dreg [(|HI, LO|)];
[IF Cond] SR = [SR OR] NORM Dreg [(|HI, LO|)];
[IF Cond] SE = [SR OR] EXP Dreg [(|HIX, HI, LO|)];
[IF Cond] SB = [SR OR] EXPADJ Dreg;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Arithmetic Shift” on page 5-6
• “Logical Shift” on page 5-10
• “Normalize” on page 5-14
• “Exponent Derive” on page 5-20
• “Exponent (Block) Adjust” on page 5-23
9-38 ADSP-219x Instruction Set Reference
Type 17: Any Reg «··· Any Reg
General register move
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 1 0 1
11 10 9 8 7 6 5 4 3 2 1 0
DRGP SRGP DDREG SDREG
SYNTAX
Reg = Reg;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Register to Register Move” on page 7-22
ADSP-219x Instruction Set Reference 9-39
Instruction Opcodes
Type 18: Mode Change
Mode control
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 1 0 0 TI MM
11 10 9 8 7 6 5 4 3 2 1 0
AS OL BR SR SD INT
SYNTAX
ENA | TI, MM, AS, OL, BR, SR, SD, INT | ;
DIS | TI, MM, AS, OL, BR, SR, SD, INT |;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Mode Control” on page 8-69
9-40 ADSP-219x Instruction Set Reference
Type 19: Indirect Jump/Call
Conditional indirect jump/call with delayed branch option
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 0 1 1 B S G
11 10 9 8 7 6 5 4 3 2 1 0
COND I
SYNTAX
[IF Cond] CALL <Ireg> [(DB)];
[IF Cond] JUMP <Ireg> [(DB)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect CALL” on page 8-42
• “Indirect JUMP” on page 8-45
ADSP-219x Instruction Set Reference 9-41
Instruction Opcodes
Type 20: Return
Conditional return from interrupt/return from subroutine with delayed
branch option
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 0 1 0 B T Q
11 10 9 8 7 6 5 4 3 2 1 0
COND
SYNTAX
[IF Cond] RTI [(DB)];
[IF Cond] RTS [(DB)];
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Return from Interrupt” on page 8-48
• “Return from Subroutine” on page 8-52
9-42 ADSP-219x Instruction Set Reference
Type 21: Modify DagI
DAG modify
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 0 1 1 G
11 10 9 8 7 6 5 4 3 2 1 0
I M
SYNTAX
|MODIFY (Ia += Mb), MODIFY (Ic += Md)|;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Modify Address Register—indirect” on page 7-63
ADSP-219x Instruction Set Reference 9-43
Instruction Opcodes
Type 21a: Modify DagI
DAG modify immediate value
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 0 1 0 G
11 10 9 8 7 6 5 4 3 2 1 0
MOD DATA I
SYNTAX
MODIFY (Ireg += <Imm8>);
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Modify Address Register—direct” on page 7-65
9-44 ADSP-219x Instruction Set Reference
Type 22: DM/PM «··· Data16
16-bit immediate data indirect memory write (two-word instruction)
using DAG postmodify addressing
OPCODE
First word: 16-bit data write
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 1 1 1 0 G
11 10 9 8 7 6 5 4 3 2 1 0
8 DATA LSBs I M
Second word: 16-bit data write
23 22 21 20 19 18 17 16 15 14 13 12
8 DATA MSBs
11 10 9 8 7 6 5 4 3 2 1 0
SYNTAX
|DM(Ia += Mb), DM (Ic += Md)| = <Data16>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect 16-bit Memory Write—immediate data” on page 7-55
ADSP-219x Instruction Set Reference 9-45
Instruction Opcodes
Type 22a: DM/PM «··· Data24
24-bit immediate data indirect memory write (two-word instruction)
using DAG postmodify addressing
OPCODE
First word: 24-bit data write
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 1 1 1 1 G
11 10 9 8 7 6 5 4 3 2 1 0
8 DATA MidSBs I M
Second word: 24-bit data write
23 22 21 20 19 18 17 16 15 14 13 12
8 DATA MSBs
11 10 9 8 7 6 5 4 3 2 1 0
8 DATA LSBs
SYNTAX
|PM (Ia += Mb), PM (Ic += Md)| = <Data24>:24;
! The syntax at the end of the line is required for 24-bit data. If
:24
omitted, 24-bit data is truncated by the assembler.
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect 24-bit Memory Write—immediate data” on page 7-57
9-46 ADSP-219x Instruction Set Reference
Type 23: Divide primitive, DIVQ
DIVQ divide primitive
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 1 1 1 1 0 1
11 10 9 8 7 6 5 4 3 2 1 0
0 XOP
SYNTAX
DIVQ Xop;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Divide Primitives: DIVS and DIVQ” on page 3-35
ADSP-219x Instruction Set Reference 9-47
Instruction Opcodes
Type 24: Divide primitive, DIVS
DIVS divide primitive
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 0 0 0 1 1 1 0 0 YOP
10 9 8 7 6 5 4 3 2 1 0
XOP
SYNTAX
DIVS Yop, Xop;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Divide Primitives: DIVS and DIVQ” on page 3-35
9-48 ADSP-219x Instruction Set Reference
Type 25: Saturate
Saturate MR/SR on overflow
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 1 1 0 R
11 10 9 8 7 6 5 4 3 2 1 0
SYNTAX
SAT MR;
SAT SR;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “MAC Saturate” on page 4-21
ADSP-219x Instruction Set Reference 9-49
Instruction Opcodes
Type 26:Push/Pop/Cache
Stack control
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 0 0
11 10 9 8 7 6 5 4 3 2 1 0
CF PPP LPP SPP
SYNTAX
PUSH |PC, LOOP, STS|;
POP |PC, LOOP, STS|;
FLUSH CACHE;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “PUSH or POP Stacks” on page 8-55
• “FLUSH CACHE” on page 8-61
9-50 ADSP-219x Instruction Set Reference
Type 29: Dreg «···» DM
Memory read/write with immediate modify (postmodify with update or
premodify offset)
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 1 0 0 U DRU G D
11 10 9 8 7 6 5 4 3 2 1 0
MOD DATA I DRL
SYNTAX
Dreg = DM(Ireg += <Imm8>); /* postmodify read */
DM(Ireg += <Imm8>) = Dreg; /* postmodify write */
Dreg = DM(Ireg + <Imm8>); /* premodify read */
DM(Ireg + <Imm8>) = Dreg; /* premodify write */
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect Memory Read/Write—immediate postmodify” on
page 7-49
• “Indirect Memory Read/Write—immediate premodify” on
page 7-52
ADSP-219x Instruction Set Reference 9-51
Instruction Opcodes
Type 30: NOP
No operation
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 0 0
11 10 9 8 7 6 5 4 3 2 1 0
SWCD
SYNTAX
NOP;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “No Operation” on page 8-66
9-52 ADSP-219x Instruction Set Reference
Type 31: Idle
Idle
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 0 1 0
11 10 9 8 7 6 5 4 3 2 1 0
IDLE VALUE
SYNTAX
IDLE;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Idle” on page 8-67
ADSP-219x Instruction Set Reference 9-53
Instruction Opcodes
Type 32: Any Reg «···» PM/DM
DAG memory read/write with premodify offset or postmodify update
OPCODE
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 0 1 0 1 MS U G D 0
10 9 8 7 6 5 4 3 2 1 0
RGP REG I M
SYNTAX
|DM(Ia += Mb), DM(Ic += Md)| = Reg; /*postmodify write,16-bit*/
Reg = |DM(Ia += Mb), DM(Ic += Md)|; /*premodify read,16-bit*/
|DM(Ia + Mb), DM(Ic + Md)| = Reg; /*premodify write,16-bit*/
Reg = |DM (Ia + Mb), DM (Ic + Md)|; /*postmodify read,16-bit */
|PM(Ia += Mb), PM(Ic += Md)| = Reg; /*postmodify write,24-bit*/
Reg = |PM(Ia += Mb), PM(Ic += Md)|; /*premodify read,24-bit*/
|PM(Ia + Mb), PM(Ic + Md)| = Reg; /*premodify write,24-bit*/
Reg = |PM(Ia + Mb), PM(Ic + Md)|; /*postmodify read,24-bit*/
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect 16-bit Memory Read/Write—postmodify” on page 7-30
• “Indirect 16-bit Memory Read/Write—premodify” on page 7-34
• “Indirect 24-bit Memory Read/Write—postmodify” on page 7-37
• “Indirect 24-bit Memory Read/Write—premodify” on page 7-41
9-54 ADSP-219x Instruction Set Reference
Type 32a: DM«···DAG Reg | DAG Reg«···Ireg
DAG register store with register transfer
OPCODE
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 0 1 0 1 0 U G 1 1
10 9 8 7 6 5 4 3 2 1 0
0 RGP DAG REG I M
SYNTAX
DM(Ireg1 += Mreg1) = |Ireg2, Mreg2, Lreg2|,
|Ireg2, Mreg2, Lreg2|= Ireg1 ;
DM(Ireg1 += Mreg1) = |Ireg2, Mreg2, Lreg2|,
|Ireg2, Mreg2, Lreg2| = Ireg1 ;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Indirect DAG Register Write (premodify or postmodify), with
DAG Register Move” on page 7-45
ADSP-219x Instruction Set Reference 9-55
Instruction Opcodes
Type 33: Reg3 «··· Data12
Load short constants
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12 11
0 0 0 1 0 0 0 0 12-bit data
10 9 8 7 6 5 4 3 2 1 0
12-bit data REG3
SYNTAX
Reg3 = <Data12>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Direct Register Load” on page 7-27
9-56 ADSP-219x Instruction Set Reference
Type 34: Dreg «···» IOreg
I/O register read/write
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 1 0 1 2MSBs addr D
11 10 9 8 7 6 5 4 3 2 1 0
8-bit Address DREG
SYNTAX
IO(<Addr10>) = Dreg;
Dreg = IO (<Addr10>);
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “External IO Port Read/Write” on page 7-59
ADSP-219x Instruction Set Reference 9-57
Instruction Opcodes
Type 35: Dreg «···»Sreg
System control register read/write
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 1 0 0 D
11 10 9 8 7 6 5 4 3 2 1 0
8-bit Address DREG
SYNTAX
REG(<Addr8>) = Dreg;
Dreg = REG(<Addr8>);
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “System Control Register Read/Write” on page 7-61
9-58 ADSP-219x Instruction Set Reference
Type 36: Long Jump/Call
Conditional long jump/call (two-word instruction)
OPCODE BITS
• First word
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 0 1 S
11 10 9 8 7 6 5 4 3 2 1 0
8 Address MSBs COND
• Second word
23 22 21 20 19 18 17 16 15 14 13 12
16 Address LSBs
11 10 9 8 7 6 5 4 3 2 1 0
16 Address LSBs
SYNTAX
[IF Cond] LJUMP <Addr24>;
[IF Cond] LCALL <Addr24>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Long CALL” on page 8-37
• “Long JUMP” on page 8-40
ADSP-219x Instruction Set Reference 9-59
Instruction Opcodes
Type 37: Interrupt
Software interrupt
OPCODE BITS
23 22 21 20 19 18 17 16 15 14 13 12
0 0 0 0 0 1 1 1 0
11 10 9 8 7 6 5 4 3 2 1 0
C BIT
SYNTAX
SETINT <Imm4>;
CLRINT <Imm4>;
SEE ALSO
• “Opcode Mnemonics” on page 9-1
• “Set Interrupt” on page 8-62
• “Clear Interrupt” on page 8-64
9-60 ADSP-219x Instruction Set Reference
ADSP-219x Instruction Set Reference 9-61
Instruction Opcodes
9-62 ADSP-219x Instruction Set Reference
Reference in New Issue Copy Permalink