Complete Yocto mirror with license table for TQMa6UL (2038-compliance)

- 264 license table entries with exact download URLs (224/264 resolved)
- Complete sources/ directory with all BitBake recipes
- Build configuration: tqma6ul-multi-mba6ulx, spaetzle (musl)
- Full traceability for Softwarefreigabeantrag
- GCC 13.4.0, Linux 6.6.102, U-Boot 2023.04, musl 1.2.4
- License distribution: GPL-2.0 (24), MIT (23), GPL-2.0+ (18), BSD-3 (16)

sources/meta-freescale/conf/machine/imx8qm-mek.conf

@@ -0,0 +1,91 @@
+#@TYPE: Machine
+#@NAME: i.MX 8QM MEK
+#@SOC: i.MX8QM
+#@DESCRIPTION: i.MX 8QuadMax Multisensory Enablement Kit board, rev B0
+#@MAINTAINER: Lauren Post <lauren.post@nxp.com>
+
+MACHINEOVERRIDES =. "mx8:mx8qm:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/arm/armv8a/tune-cortexa72-cortexa53.inc
+
+IMX_DEFAULT_BSP = "nxp"
+
+MACHINE_FEATURES += "pci optee bcm43455 bcm4356 nxp8997-pcie nxp9098-pcie"
+MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
+
+# Don't include kernels in standard images
+RRECOMMENDS:${KERNEL_PACKAGE_NAME}-base = ""
+
+LOADADDR = ""
+
+# We have to disable SERIAL_CONSOLE due to auto-serial-console
+SERIAL_CONSOLES = "115200;ttyLP0"
+
+# we do not want to have getty running on tty1 as we run
+# auto-serial-console there
+USE_VT = "0"
+
+KERNEL_DEVICETREE = " \
+    freescale/imx8qm-mek.dtb \
+    freescale/imx8qm-mek-ca53.dtb \
+    freescale/imx8qm-mek-ca72.dtb \
+    freescale/imx8qm-mek-dsi-rm67191.dtb \
+    freescale/imx8qm-mek-dsi-rm67199.dtb \
+    freescale/imx8qm-mek-dsi-serdes.dtb \
+    freescale/imx8qm-mek-dsi-serdes-dual-display.dtb \
+    freescale/imx8qm-mek-dsi-serdes-dual-display-rpmsg.dtb \
+    freescale/imx8qm-mek-dsi-serdes-rpmsg.dtb \
+    freescale/imx8qm-mek-enet2-tja1100.dtb \
+    freescale/imx8qm-mek-hdmi.dtb \
+    freescale/imx8qm-mek-hdmi-rx.dtb \
+    freescale/imx8qm-mek-hdmi-rx-ov5640.dtb \
+    freescale/imx8qm-mek-jdi-wuxga-lvds1-panel.dtb \
+    freescale/imx8qm-mek-jdi-wuxga-lvds1-panel-rpmsg.dtb \
+    freescale/imx8qm-mek-ov5640.dtb \
+    freescale/imx8qm-mek-pcie-ep.dtb \
+    freescale/imx8qm-mek-rpmsg.dtb \
+    freescale/imx8qm-mek-sof.dtb \
+    freescale/imx8qm-mek-sof-cs42888.dtb \
+    freescale/imx8qm-mek-sof-wm8960.dtb \
+    freescale/imx8qm-mek-usd-wifi.dtb \
+    freescale/imx8qm-mek-usdhc3-m2.dtb \
+"
+
+UBOOT_MAKE_TARGET = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '', \
+                                                       'u-boot.bin', d)}"
+SPL_BINARY = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
+                                                       '', d)}"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
+
+UBOOT_SUFFIX = "bin"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd]      = "imx8qm_mek_defconfig,sdcard"
+UBOOT_CONFIG[fspi]    = "imx8qm_mek_fspi_defconfig"
+
+IMX_BOOT_SEEK = "32"
+
+IMAGE_BOOT_FILES += "hdmitxfw.bin hdmirxfw.bin dpfw.bin"
+
+# Set ATF platform name
+ATF_PLATFORM = "imx8qm"
+
+IMXBOOT_TARGETS_SD = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \
+                                                       'flash flash_ca72', d)}"
+IMXBOOT_TARGETS_FSPI = \
+    "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \
+                                                       'flash_flexspi', d)}"
+IMXBOOT_TARGETS = \
+    "${@bb.utils.contains('UBOOT_CONFIG',        'sd', '${IMXBOOT_TARGETS_SD}', \
+                                                       '${IMXBOOT_TARGETS_FSPI}', d)}"
+IMX_BOOT_SOC_TARGET = "iMX8QM"
+
+BOARD_TYPE = "mek"
+
+# Add additional firmware
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"